Home

Council Directive 93/94/EEC of 29 October 1993 relating to the space for mounting the rear registration plate of two or three-wheel vehicles

Council Directive 93/94/EEC of 29 October 1993 relating to the space for mounting the rear registration plate of two or three-wheel vehicles

THE COUNCIL OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Economic Community, and in particular Article 100a thereof,

Having regard to Council Directive 92/61/EEC of 30 June 1992 relating to the type-approval of two or three-wheel motor vehicles(1),

Having regard to the proposal from the Commission(2),

In cooperation with the European Parliament(3),

Having regard to the opinion of the Economic and Social Committee(4),

  1. Whereas the internal market comprises an area without internal frontiers in which the free movement of goods, persons, services and capital is ensured; whereas the measures necessary for its operation should be adopted;

  2. Whereas, with regard to the space for mounting the rear registration plate, in each Member State two or three-wheel motor vehicles must display certain technical characteristics laid down by mandatory provisions which differ from one Member State to another; whereas, as a result of their differences, such provisions constitute a barrier to trade within the Community;

  3. Whereas those obstacles to the operation of the internal market may be removed if the same requirements are adopted by all Member States in place of their national rules;

  4. Whereas it is necessary to draw up harmonized requirements concerning the the space for mounting the rear registration plate of two or three-wheel motor vehicles in order to enable the type-approval and component type-approval procedures laid down in Directive 92/61/EEC to be applied for each type of such vehicle;

  5. Whereas the objective of this Directive is not to harmonize the dimensions of registration plates used in the various Member States; whereas the Member States should therefore ensure that protruding registration plates do not constitute a danger for users, without, however, this requiring any modification with regard to vehicle construction;

  6. Whereas, given the scale and impact of the action proposed in the sector in question, the Community measures covered by this Directive are necessary, indeed essential, to achieve the aim in view, which is to establish Community vehicle type-approval; whereas that aim cannot be adequately achieved by the Member States individually;

HAS ADOPTED THIS DIRECTIVE:

Article 1

This Directive and its Annex apply to the space for mounting the rear registration plate of all types of vehicle as defined in Article 1 of Directive 92/61/EEC.

Article 2

The procedure for the granting of component type-approval in respect of the space for mounting the rear registration plate of two or three-wheel motor vehicle and the conditions governing the free movement of such vehicles shall be as laid down in Chapters II and III of Directive 92/61/EEC.

Article 3

Any amendments necessary to adapt the requirements of the Annexes to technical progress shall be adopted in accordance with the procedure laid down in Article 13 of Directive 70/156/EEC(5).

Article 4

1.

Member States shall adopt and publish the provisions necessary to comply with this Directive before 1 May 1995. They shall forthwith inform the Commission thereof.

When the Member States adopt these provisions, they shall contain a reference to this Directive or shall be accompanied by such a reference on the occasion of their official publication. The methods of making such a reference shall be laid down by the Member States.

From the date mentioned in the first subparagraph Member States may not, for reasons connected with the space for mounting the rear registration plate, prohibit the initial entry into service of vehicles which conform to this Directive.

They shall apply the provisions referred to in the first subparagraph as from 1 November 1995.

2.

Member States shall communicate to the Commission the texts of the provisions of national law which they adopt in the field covered by this Directive.

Article 5

ANNEX

Appendix 1Information document in respect of the space for mounting the rear registration plate of a type of two or three-wheel motor vehicle

Appendix 2