Home

Commission Implementing Regulation (EU) 2015/1416 of 20 August 2015 concerning the authorisation of sodium bisulphate as feed additive for all animal species (Text with EEA relevance)

Commission Implementing Regulation (EU) 2015/1416 of 20 August 2015 concerning the authorisation of sodium bisulphate as feed additive for all animal species (Text with EEA relevance)

Article 1

The substance specified in Annex I, belonging to the additive category ‘technological additives’ and to the functional group ‘preservatives’, is authorised as an additive in animal nutrition, subject to the conditions laid down in that Annex.

Article 2

The substance specified in Annex II, belonging to the additive category ‘technological additives’ and to the functional group ‘acidity regulators’, is authorised as an additive in animal nutrition, subject to the conditions laid down in that Annex.

Article 3

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

ANNEX I

Identification number of the additive

Name of the holder of authorisation

Additive

Composition, chemical formula, description, analytical method

Species or category of animal

Maximum age

Minimum content

Maximum content

Other provisions

End of period of authorisation

mg/kg of complete feedingstuff with a moisture content of 12 %

Category of technological additives. Functional group: preservatives

1j514ii

Sodium bisulphate

Additive composition

Sodium bisulphate: ≥ 95,2 %

Characterisation of the active substance

Sodium bisulphate CAS No 7681-38-1

NaHSO4

Na 19,15 %

SO4 80,01 %

Produced by chemical synthesis

Method of Analysis(1)

Determination of sodium hydrogen sulphate in feed additives: titrimetric method based on the determination of total soluble acidity of sodium bisulphate against a standard sodium hydroxide solution.

Aquatic animals

4 000

1. In the directions for use of the additive and premixture, indicate the storage temperature, storage life, and stability to pelleting.

2. For safety: breathing protection, eye protection and gloves shall be used during handling.

3. The total content of sodium bisulphate must not exceed the maximum permitted levels in complete feedingstuff established for each relevant species.

10 September 2025

Cats

Mink

ANNEX II