This Regulation lays down the requirements for the monitoring and reporting of CO2 emissions from and fuel consumption of new heavy-duty vehicles registered in the Union.
Regulation (EU) 2018/956 of the European Parliament and of the Council of 28 June 2018 on the monitoring and reporting of CO2 emissions from and fuel consumption of new heavy-duty vehicles (Text with EEA relevance)Text with EEA relevance
Regulation (EU) 2018/956 of the European Parliament and of the Council of 28 June 2018 on the monitoring and reporting of CO2 emissions from and fuel consumption of new heavy-duty vehicles (Text with EEA relevance)Text with EEA relevance
Article 1 Subject matter
Article 2 Scope
This Regulation applies to the monitoring and reporting by Member States and manufacturers of heavy-duty vehicles of data on new heavy-duty vehicles.
It applies with regard to the following vehicle categories:
-
vehicles of categories M1, M2, N1 and N2 with a reference mass that exceeds 2 610 kg and which do not fall within the scope of Regulation (EC) No 715/2007 of the European Parliament and of the Council(1), and all vehicles of categories M3 and N3;
-
vehicles of categories O3 and O4.
For the purposes of this Regulation, those vehicles are referred to as heavy-duty vehicles.
Article 3 Definitions
Article 4 Monitoring and reporting by Member States
Starting from 1 January 2019, Member States shall monitor the data specified in Part A of Annex I relating to new heavy-duty vehicles registered for the first time in the Union.
By 30 September each year, starting in 2020, the competent authorities of the Member States shall report those data of the previous reporting period of 1 July to 30 June to the Commission in accordance with the reporting procedure set out in Annex II.
With regard to 2019, the data reported by 30 September 2020 shall include data monitored from 1 January 2019 to 30 June 2020.
Data relating to new heavy-duty vehicles that were registered previously outside the Union shall not be monitored and reported, unless that registration was made less than three months before registration in the Union.
The competent authorities responsible for the monitoring and reporting of data in accordance with this Regulation shall be those designated by the Member States in accordance with Article 8(7) of Regulation (EC) No 443/2009.
Article 5 Monitoring and reporting by manufacturers
From the starting years set out in point 1 of Part B of Annex I, manufacturers of heavy-duty vehicles shall monitor the data specified in point 2 of Part B of Annex I, for each new heavy-duty vehicle.
By 30 September each year, from the starting years set out in point 1 of Part B of Annex I, manufacturers of heavy-duty vehicles shall report those data for each new heavy-duty vehicle with a date of simulation falling within the preceding reporting period of 1 July to 30 June to the Commission in accordance with the reporting procedure set out in Annex II.
With regard to 2019, manufacturers shall report the data for each new heavy-duty vehicle with a date of simulation falling within the period 1 January 2019 to 30 June 2020.
The date of simulation shall be the date reported in accordance with data entry 71 in point 2 of Part B of Annex I.
Each manufacturer shall appoint a contact point for the purpose of reporting data in accordance with this Regulation.