Commission Implementing Decision (EU) 2019/450 of 19 March 2019 on publication of the European Assessment Documents (EADs) for construction products drafted in support of Regulation (EU) No 305/2011 of the European Parliament and of the Council (Text with EEA relevance)Text with EEA relevance

020062-00-1102

Internal fire resisting and/or smoke control single and double leaf doorsets made of special steel-frame profiles

030219-00-0501

Acoustic spray coating based on a water-based organic binder

030350-00-0402

Liquid applied roof waterproofing kits

(superseding technical specification ‘ETAG 005’)

030351-00-0402

Systems of mechanically fastened flexible roof waterproofing sheets

(superseding technical specification ‘ETAG 006’)

030352-00-0503

Liquid applied watertight covering kits for wet room floors and/or walls

(superseding technical specification ‘ETAG 022-1’)

030378-00-0605

Fully bonded, pre-applied flexible sheet for waterproofing

030400-00-0605

Waterproofing kit based on polymeric membranes for in- and outdoor walls and floors of wet areas and swimming pools

030436-00-0503

Watertight covering kits based on flexible sheets for wet room floors and/or walls

(superseding technical specification ‘ETAG 022-2’)

030437-00-0503

Watertight covering kits based on inherently watertight boards for wet room floors and/or walls

(superseding technical specification ‘ETAG 022-3’)

040016-01-0404

Glass fibre mesh for reinforcement of cementitious or cement-based renderings

(superseding EAD 040016-00-0404)

040036-00-0501

Mineral pre-coated ceiling panels

040083-00-0404

External Thermal Insulation Composite Systems (ETICS) with renderings

(superseding technical specification ‘ETAG 004’)

040419-00-1201

Thermal insulation board made of pressed rigid polyurethane foam

040427-00-0404

Kits for external thermal insulation composite system (ETICS) with mortar as thermal insulation product and renderings or discontinuous claddings as exterior skin

040465-00-0404

ETICS with renderings on mono-layer or multi-layer wall made of timber

040729-00-1201

Thermal insulation made of loose fill mineral wool

040759-00-0404

External thermal insulation composite system (ETICS) with rendering on boards based on polystyrene cement

040914-00-0404

Veture kits – Prefabricated units for external wall insulation and their fixing devices

(superseding technical specification ‘ETAG 017’)

041389-00-1201

Boards made of agglomerated natural cork for thermal and acoustic insulation

050019-00-0301

Dowels for structural joints under static and quasi-static loading

(superseding technical specification ETAG 030)

060012-00-0802

Kit consisting of chimney flue liner, made of glass fibres, mineral and organic substances, and ancillaries

090119-00-0404

Kits for external wall cladding of mineral boards with renderings applied in situ

090120-00-0404

Kits for non-load bearing mineral board external wall systems

100012-00-1106

Flexible sprinkler hose with end fittings

120093-00-0107

Flexible asphaltic plug expansion joints for road bridges

(superseding technical specification ‘ETAG 032-3’)

120109-00-0107

Nosing expansion joints for road bridges

(superseding technical specification ‘ETAG 032-4’)

120110-00-0107

Mat expansion joints for road bridges

(superseding technical specification ‘ETAG 032-5’)

120111-00-0107

Cantilever expansion joints for road bridges

(superseding technical specification ‘ETAG 032-6’)

120112-00-0107

Supported expansion joints for road bridges

(superseding technical specification ‘ETAG 032-7’)

120113-00-0107

Modular expansion joints for road bridges

(superseding technical specification ‘ETAG 032-8’)

130031-00-0304

Metal web beams and columns

130082-00-0603

Façade fixing system - plastic bracket for fixing timber or wood based elements to the substructure

130186-00-0603

Three-dimensional nailing plates

(superseding technical specification ‘ETAG 015’)

130118-01-0603

Screws and threaded rods for use in timber constructions

(superseding EAD 130118-00-0603)

130287-00-0603

Profiled aluminium nail for use in timber structures

130308-00-0304

Structural composite lumber product: Laminated Strand Lumber (LSL)

130320-00-0304

Glued laminated timber made of solid hardwood

130336-00-0603

Point connector – Dovetail made of plywood for cross laminated timber

130348-00-0304

Laminated segment timber with rectangular cross section made from radially cut logs

130367-00-0304

Composite wood-based beams and columns

(superseding technical specification ‘ETAG 011’)

130484-00-0304

Tension proof loaded structural finger jointed solid timber which may be processed to glued laminated timber and glued solid timber

130661-00-0304

Glued laminated timber with full cross section finger joint

140022-00-0304

Prefabricated wood-based loadbearing stressed skin panels

(superseding technical specification ‘ETAG 019’)

160055-00-0301

Lattice girders for the increase of punching resistance in flat slabs and column

160057-00-0301

L- or Z-shaped metal sheets for the increase of punching shear resistance of flat slabs or footings and ground slabs

160129-00-0301

Couplers for mechanical splices of reinforcing steel bars

170005-00-0305

Re-cycled clay masonry units

170011-00-0305

Insulating building element for masonry walls

180023-00-0704

Vertical centrifugal storm water flow regulator

180025-00-0704

Prefabricated wastewater treatment plants for at least 51 up to 500 PT

190013-00-0502

Thermal and sound insulating dry screed systems with prefabricated flooring elements

200050-02-0102

Gabion boxes, mattresses and sack gabions made of hexagonal regular twisted mesh metallic pre-coated with or without additional organic coating

(superseding EAD 200050-01-0102)

200207-00-0302

Load-bearing external wall and partition wall kit

210005-00-0505

Internal partition kits for use as non-loadbearing walls

(superseding technical specification ‘ETAG 003’)

210046-00-1201

Thin metal composite sheet

210134-00-1202

Soundproofing boards/dry screed and load bearing strips made of corrugated cardboard filled with quartz sand

220010-01-0402

Flat plastic roofing sheets made of recycled plastic for self-supporting and/or fully supported discontinuous roofing and/or external cladding

(superseding EAD 220010-00-0402)

220062-00-0401

Rooflight with bonded or mechanically fastened cover glass

220089-00-0401

Self-supporting translucent roof kits with covering made of plastic sheets

(superseding technical specification ‘ETAG 010’)

220116-00-0401

Fixed fire-resistant roof window

230145-00-0105

Compound for bitumen and bituminous mixtures made of crumb rubber powder

260014-00-0301

Calcined layer silicate based type II addition

260017-00-0301

Elastic micro hollow spheres as concrete admixture

260020-00-0301

Calcium carbonate fine as active addition with catalytic binding performance for concrete

260026-00-0301

Waterproofing admixture for concrete

260067-00-0301

Polymer macro fibres reinforced with basalt fibre for the use in concrete

280004-00-0702

Flanged balancing valves

330008-03-0601

Anchor channels

(superseding technical specification ‘EAD 330008-02-0601’)

330087-01-0601

Systems for post-installed rebar connections with mortar

(superseding technical specification ‘EAD 330087-00-0601’)

330232-01-0601

Mechanical fasteners for use in concrete

(superseding technical specification ‘EAD 330232-00-0601’)

330232-01-0601 -v01

Torque-controlled expansion fasteners for use in concrete with variable working life up to 50 years

330250-00-0601

Post-installed fasteners in concrete under fatigue cyclic loading

330284-00-0604

Plastic anchors for redundant non-structural systems in concrete and masonry

(superseding technical specification ETAG 020)

332229-00-0602

Stainless steel point fastener for glass claddings

330499-01-0601

Bonded fasteners for use in concrete

(superseding technical specification ‘ETAG 001-5’ and EAD 330499-00-0601)

331433-00-0601

Injected anchor for thermal insulation boards

331924-00-0602

Decking fixing assemblies

332001-00-0602

Clamping system for connection of precast concrete members

332277-00-0601

Fastener for push-pull props for precast wall/column elements

340179-00-0203

Structural panelled building kit

340275-00-0104

Externally-bonded composite systems with inorganic matrix for strengthening of concrete and masonry structures

340308-00-0203

Timber building kits

(superseding technical specification ‘ETAG 007’)

340309-00-0305

Non load-bearing permanent shuttering kits/systems based on hollow blocks or panels of insulating materials and sometimes concrete

(superseding technical specification ‘ETAG 009’)

340383-00-0203

Modular pre-fabricated cemetery construction structure

340392-00-0104

CRM (Composite Reinforced Mortar) Systems for strengthening concrete and masonry structures

350865-00-1106

Fire retardant products

(superseding technical specification ‘ETAG 028’)

360027-00-0101

Drainage system used in underground rock caverns