The references to harmonised standards for recreational craft and personal watercraft drafted in support of Directive 2013/53/EU, listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union.
Commission Implementing Decision (EU) 2019/919 of 4 June 2019 on the harmonised standards for recreational craft and personal watercraft drafted in support of Directive 2013/53/EU of the European Parliament and of the Council
Commission Implementing Decision (EU) 2019/919 of 4 June 2019 on the harmonised standards for recreational craft and personal watercraft drafted in support of Directive 2013/53/EU of the European Parliament and of the Council
Article 1
Article 2
The references to harmonised standards for recreational craft and personal watercraft drafted in support of Directive 2013/53/EU, listed in Annex II to this Decision, are hereby withdrawn from the Official Journal of the European Union.
Article 3
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
ANNEX I
No |
Reference of the standard |
|---|---|
1. |
EN ISO 6185-1:2018 |
|
Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001) |
2. |
EN ISO 6185-2:2018 |
|
Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001) |
3. |
EN ISO 6185-3:2018 |
|
Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
4. |
EN ISO 6185-4:2018 |
|
Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
5. |
EN ISO 7840:2018 |
|
Small craft - Fire-resistant fuel hoses (ISO 7840:2013) |
6. |
EN ISO 8469:2018 |
|
Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013) |
7. |
EN ISO 8666:2018 |
|
Small craft - Principal data (ISO 8666:2016) |
8. |
EN ISO 8849:2018 |
|
Small craft - Electrically operated direct-current bilge pumps (ISO 8849:2003) |
9. |
EN ISO 9093-1:2018 |
|
Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994) |
10. |
EN ISO 9093-2:2018 |
|
Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002) |
11. |
EN ISO 11192:2018 |
|
Small craft - Graphical symbols (ISO 11192:2005) |
12. |
EN ISO 11547:2018 |
|
Small craft - Start-in-gear protection (ISO 11547:1994) |
13. |
EN ISO 11812:2018 |
|
Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001) |
14. |
EN ISO 12215-1:2018 |
|
Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
15. |
EN ISO 12215-2:2018 |
|
Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002) |
16. |
EN ISO 12215-3:2018 |
|
Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002) |
17. |
EN ISO 12215-4:2018 |
|
Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 12215-4:2002) |
19. |
EN ISO 12215-6:2018 |
|
Small craft - Hull construction and scantlings - Part 6: Structural arrangements and details (ISO 12215-6:2008) |
20. |
EN ISO 12215-8:2018 |
|
Small craft - Hull construction and scantlings - Part 8: Rudders (ISO 12215-8:2009, including Cor 1:2010) |
21. |
EN ISO 12215-9:2018 |
|
Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012) |
22. |
EN ISO 12216:2018 |
|
Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO 12216:2002) |
23. |
EN ISO 13297:2018 |
|
Small craft - Electrical systems - Alternating current installations (ISO 13297:2014) |
24. |
EN ISO 13590:2018 |
|
Small craft - Personal watercraft - Construction and system installation requirements (ISO 13590:2003) |
25. |
EN ISO 14509-1:2018 |
|
Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measurement procedures (ISO 14509-1:2008) |
26. |
EN ISO 14509-3:2018 |
|
Small craft - Airborne sound emitted by powered recreational craft - Part 3: Sound assessment using calculation and measurement procedures (ISO 14509-3:2009) |
27. |
EN ISO 15083:2018 |
|
Small craft - Bilge-pumping systems (ISO 15083:2003) |
28. |
EN ISO 15084:2018 |
|
Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003) |
29. |
EN ISO 16180:2018 |
|
Small craft - Navigation lights - Installation, placement and visibility (ISO 16180:2013) |
30. |
EN ISO 21487:2018 |
|
Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012, including Amd 1:2014 and Amd 2:2015) |
31. |
EN ISO 25197:2018 |
|
Small craft - Electrical/electronic control systems for steering, shift and throttle (ISO 25197:2012, including Amd 1:2014) |
32. |
EN ISO 10087:2019 |
|
Small craft - Craft identification - Coding system |
33. |
EN ISO 12215-5:2019 |
|
Small craft - Hull construction and scantlings, Part 5: Design pressures for monohulls, design stresses and scantlings determination |
34. |
EN ISO 11105:2020 |
|
Small craft – Ventilation of petrol engine and/or petrol tank compartments |
ANNEX II
No |
Reference of the standard |
|---|---|
1. |
EN ISO 6185-1:2001 |
|
Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001) |
2. |
EN ISO 6185-2:2001 |
|
Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001) |
3. |
EN ISO 6185-3:2014 |
|
Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
4. |
EN ISO 6185-4:2011 |
|
Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
5. |
EN ISO 7840:2013 |
|
Small craft - Fire-resistant fuel hoses (ISO 7840:2013) |
6. |
EN ISO 8469:2013 |
|
Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013) |
7. |
EN ISO 8849:2003 |
|
Small craft - Electrically operated direct-current bilge-pumps (ISO 8849:2003) |
8. |
EN ISO 9093-1:1997 |
|
Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994) |
9. |
EN ISO 9093-2:2002 |
|
Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002) |
10. |
EN ISO 11192:2005 |
|
Small craft - Graphical symbols (ISO 11192:2005) |
11. |
EN ISO 11547:1995 |
|
Small craft - Start-in-gear protection (ISO 11547:1994) |
|
EN ISO 11547:1995/A1:2000 |
12. |
EN ISO 11812:2001 |
|
Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001) |
13. |
EN ISO 12215-1:2000 |
|
Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
14. |
EN ISO 12215-2:2002 |
|
Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002) |
15. |
EN ISO 12215-3:2002 |
|
Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002) |
16. |
EN ISO 12215-4:2002 |
|
Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 12215-4:2002) |
17. |
EN ISO 12215-5:2008 |
|
Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008) |
|
EN ISO 12215-5:2008/A1:2014 |
18. |
EN ISO 12215-6:2008 |
|
Small craft - Hull construction and scantlings - Part 6: Structural arrangements and details (ISO 12215-6:2008) |
19. |
EN ISO 12215-8:2009 |
|
Small craft - Hull construction and scantlings - Part 8: Rudders (ISO 12215-8:2009) |
|
EN ISO 12215-8:2009/AC:2010 |
20. |
EN ISO 12215-9:2012 |
|
Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012) |
21. |
EN ISO 12216:2002 |
|
Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO 12216:2002) |
22. |
EN ISO 13297:2014 |
|
Small craft - Electrical systems - Alternating current installations (ISO 13297:2014) |
23. |
EN ISO 13590:2003 |
|
Small craft - Personal watercraft - Construction and system installation requirements (ISO 13590:2003) |
|
EN ISO 13590:2003/AC:2004 |
24. |
EN ISO 14509-1:2008 |
|
Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measurement procedures (ISO 14509-1:2008) |
25. |
EN ISO 14509-3:2009 |
|
Small craft - Airborne sound emitted by powered recreational craft - Part 3: Sound assessment using calculation and measurement procedures (ISO 14509-3:2009) |
26. |
EN ISO 15083:2003 |
|
Small craft - Bilge-pumping systems (ISO 15083:2003) |
27. |
EN ISO 15084:2003 |
|
Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003) |
28. |
EN ISO 16180:2013 |
|
Small craft - Navigation lights - Installation, placement and visibility (ISO 16180:2013) |
29. |
EN ISO 21487:2012 |
|
Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012) |
|
EN ISO 21487:2012/A1:2014 |
|
EN ISO 21487:2012/A2:2015 |
30. |
EN ISO 25197:2012 |
|
Small craft - Electrical/electronic control systems for steering, shift and throttle (ISO 25197:2012) |
|
EN ISO 25197:2012/A1:2014 |
31. |
EN ISO 9097:2017 Small craft – Electric fans |