The references of harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU, listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union.
Commission Implementing Decision (EU) 2019/1616 of 27 September 2019 on the harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU of the European Parliament and of the Council
Commission Implementing Decision (EU) 2019/1616 of 27 September 2019 on the harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU of the European Parliament and of the Council
Article 1
Article 2
The references of harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU, listed in Annex II to this Decision, are hereby withdrawn from the Official Journal of the European Union as from the dates set out in that Annex.
Article 3
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
ANNEX I
No |
Reference of the standard |
|---|---|
1. |
EN 1562:2019 Founding — Malleable cast irons |
2. |
EN 1563:2018 Founding — Spheroidal graphite cast irons |
3. |
EN ISO 4126-2:2019 Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices (ISO 4126-2:2018) |
4. |
EN 12516-1:2014+A1:2018 Industrial valves — Shell design strength — Part 1: Tabulation method for steel valve shells |
5. |
EN 12516-4:2014+A1:2018 Industrial valves — Shell design strength — Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
6. |
EN 13136:2013+A1:2018 Refrigerating systems and heat pumps — Pressure relief devices and their associated piping — Methods for calculation |
7a. |
EN 13445-2:2021 Unfired pressure vessels – Part 2: Materials |
8. |
EN 13445-3:2014 Unfired pressure vessels – Part 3: Design EN 13445-3:2014/A1:2015 EN 13445-3:2014/A2:2016 EN 13445-3:2014/A3:2017 EN 13445-3:2014/A4:2018 EN 13445-3:2014/A5:2018 EN 13445-3:2014/A6:2019 EN 13445-3:2014/A7:2019 EN 13445-3:2014/A8:2019 |
8a. |
EN 13445-3:2021 Unfired pressure vessels – Part 3: Design |
9a. |
EN 13445-5:2021 Unfired pressure vessels – Part 5: Inspection and testing |
10a. |
EN 13445-6:2021 Unfired pressure vessels – Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron |
11. |
EN 13480-2:2017 Metallic industrial piping - Part 2: Materials EN 13480-2:2017/A1:2018 EN 13480-2:2017/A2:2018 EN 13480-2:2017/A3:2018 EN 13480-2:2017/A7:2020 |
11a. |
EN 13480-2:2017 Metallic industrial piping - Part 2: Materials EN 13480-2:2017/A3:2018 EN 13480-2:2017/A1:2018 EN 13480-2:2017/A2:2018 EN 13480-2:2017/A7:2020 EN 13480-2:2017/A8:2021 |
12. |
EN 13480-5:2017 Metallic industrial piping — Part 5: Inspection and testing EN 13480-5:2017/A1:2019 |
12a. |
EN 13480-5:2017 Metallic industrial piping - Part 5: Inspection and testing EN 13480-5:2017/A1:2019 EN 13480-5:2017/A2:2021 |
13. |
EN ISO 15494:2018 Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system (ISO 15494:2015) |
14. |
EN ISO 21028-2:2018 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 2: Temperatures between – 80 degrees C and – 20 degrees C (ISO 21028-2:2018) |
15. |
EN ISO 4126-1:2013 Safety devices for protection against excessive pressure – Part 1: Safety valves (ISO 4126-1:2013) EN ISO 4126-1:2013/A2:2019 |
16. |
EN 10217-1:2019 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties |
17. |
EN 10217-2:2019 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties |
18. |
EN 10217-3:2019 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties |
19. |
EN 10217-4:2019 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 4: Electric welded non-alloy steel tubes with specified low temperature properties |
20. |
EN 10217-5:2019 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
21. |
EN 10217-6:2019 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties |
22. |
EN 13480-1:2017 Metallic industrial piping – Part 1: General EN 13480-1:2017/A1:2019 |
23. |
EN 13480-6:2017 Metallic industrial piping – Part 6: Additional requirements for buried piping EN 13480-6:2017/A1:2019 |
24. |
EN ISO 4126-3:2020 Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2020) |
25. |
EN 12542:2020 LPG equipment and accessories - Static welded steel cylindrical pressure vessels, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 - Design and manufacture |
26. |
EN 12735-1:2020 Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
27. |
EN 12953-5:2020 Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler |
28. |
EN 13175:2019+A1:2020 LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings |
29. |
EN 13480-3:2017 Metallic industrial piping – Part 3: Design and calculation EN 13480-3:2017/A2:2020 EN 13480-3:2017/A3:2020 EN 13480-3:2017/A1:2021 |
29a. |
EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation EN 13480-3:2017/A3:2020 EN 13480-3:2017/A1:2021 EN 13480-3:2017/A2:2020 EN 13480-3:2017/A4:2021 |
30. |
EN 14276-1:2020 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
31. |
EN 14276-2:2020 Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements |
32. |
EN ISO 15620:2019 Welding - Friction welding of metallic materials (ISO 15620:2019) |
33. |
EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) EN ISO 16135:2006/A1:2019 |
34. |
EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) EN ISO 16136:2006/A1:2019 |
35. |
EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) EN ISO 16137:2006/A1:2019 |
36. |
EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) EN ISO 16138:2006/A1:2019 |
37. |
EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) EN ISO 16139:2006/A1:2019 |
38. |
EN 16767:2020 Industrial valves - Metallic check valves |
39. |
EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) EN ISO 21787:2006/A1:2019 |
40. |
EN 1515-4:2021 Flanges and their joints – Bolting – Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU |
41. |
EN 14222:2021 Stainless steel steam boilers |
42. |
EN 10216-5:2021 Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 5: Stainless steel tubes |
43. |
EN 10217-7:2021 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 7: Stainless steel tubes |
44. |
EN 10222-2:2017+A1:2021 Steel forgings for pressure purposes – Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
45. |
EN 10222-4:2017+A1:2021 Steel forgings for pressure purposes – Part 4: Weldable fine grain steels with high proof strength |
46. |
EN 13445-1:2021 Unfired pressure vessels – Part 1: General |
47. |
EN 13445-4:2021 Unfired pressure vessels – Part 4: Fabrication |
48. |
EN 13445-8:2021 Unfired pressure vessels – Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys |
49. |
EN 13445-10:2021 Unfired pressure vessels – Part 10: Additional requirements for pressure vessels of nickel and nickel alloys |
50. |
EN 17278:2021 Natural gas vehicles – Vehicle fuelling appliances |
51. |
EN 3-8:2021 Portable fire extinguishers - Part 8: Requirements for the construction, pressure resistance and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 3-7 |
52. |
EN ISO 9712:2022 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2021) |
53. |
EN 10253-2:2021 Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
54. |
EN 12516-2:2014+A1:2021 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
55. |
EN 12952-2:2021 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
56. |
EN 12952-5:2021 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
57. |
EN 12952-6:2021 Water-tube boilers and auxiliary installations - Part 6: Inspection during construction, documentation and marking of pressure parts of the boiler |
58. |
EN 12952-10:2021 Water-tube boilers and auxiliary installations - Part 10: Requirements for safety devices against excessive pressure |
59. |
EN 13121-1:2021 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance criteria |
60. |
EN 14917:2021 Metal bellows expansion joints for pressure applications |
61. |
EN ISO 21922:2021 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking (ISO 21922:2021) |
ANNEX II
No |
Reference of the standard |
Date of withdrawal |
|---|---|---|
1. |
EN 13445-2:2014 Unfired pressure vessels — Part 2: Materials EN 13445-2:2014/A1:2016 EN 13445-2:2014/A2:2018 |
30 September 2019 |
2. |
EN 13445-3:2014 Unfired pressure vessels — Part 3: Design EN 13445-3:2014/A1:2015 EN 13445-3:2014/A2:2016 EN 13445-3:2014/A3:2017 EN 13445-3:2014/A4:2018 |
30 September 2019 |
3. |
EN 13445-5:2014 Unfired pressure vessels — Part 5: Inspection and testing |
30 September 2019 |
4. |
EN 13445-6:2014 Unfired pressure vessels — Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron |
30 September 2019 |
5. |
EN 13480-2:2017 Metallic industrial piping — Part 2: Materials |
30 September 2019 |
6. |
EN 13480-5:2017 Metallic industrial piping — Part 5: Inspection and testing |
30 September 2019 |
7. |
EN 1252-2:2001 Cryogenic vessels — Materials — Part 2: Toughness requirements for temperatures between – 80 °C and – 20 °C |
30 March 2020 |
8. |
EN 1562:2012 Founding — Malleable cast irons |
30 March 2020 |
9. |
EN 1563:2011 Founding — Spheroidal graphite cast irons |
30 March 2020 |
10. |
EN 12516-1:2014 Industrial valves — Shell design strength — Part 1: Tabulation method for steel valve shells |
30 March 2020 |
11. |
EN 12516-4:2014 Industrial valves — Shell design strength — Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
30 March 2020 |
12. |
EN 13136:2013 Refrigerating systems and heat pumps — Pressure relief devices and their associated piping — Methods for calculation |
30 March 2020 |
13. |
EN 10217-1:2002 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 1: Non-alloy steel tubes with specified room temperature properties EN 10217-1:2002/A1:2005 |
20 April 2021 |
14. |
EN 10217-2:2002 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties EN 10217-2:2002/A1:2005 |
20 April 2021 |
15. |
EN 10217-3:2002 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 3: Alloy fine grain steel tubes EN 10217-3:2002/A1:2005 |
20 April 2021 |
16. |
EN 10217-4:2002 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 4: Electric welded non-alloy steel tubes with specified low temperature properties EN 10217-4:2002/A1:2005 |
20 April 2021 |
17. |
EN 10217-5:2002 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties EN 10217-5:2002/A1:2005 |
20 April 2021 |
18. |
EN 10217-6:2002 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties EN 10217-6:2002/A1:2005 |
20 April 2021 |
19. |
EN 13480-1:2017 Metallic industrial piping – Part 1: General |
20 April 2020 |
20. |
EN 13480-6:2017 Metallic industrial piping – Part 6: Additional requirements for buried piping |
20 April 2020 |
21. |
EN ISO 4126-1:2013 Safety devices for protection against excessive pressure – Part 1: Safety valves (ISO 4126-1:2013) |
20 April 2020 |
22. |
EN 12542:2010 LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 - Design and manufacture |
10 August 2022 |
23. |
EN 12735-1:2016 Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
10 August 2022 |
24. |
EN 12953-5:2002 Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler |
10 August 2022 |
25. |
EN 13175:2014 LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings |
10 August 2022 |
26. |
EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation |
10 August 2022 |
27. |
EN 14276-1:2006+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
10 August 2022 |
28. |
EN 14276-2:2007+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements |
10 August 2022 |
29. |
EN 16767:2016 Industrial valves - Steel and cast iron check valves |
10 August 2022 |
30. |
EN ISO 15620:2000 Welding - Friction welding of metallic materials (ISO 15620:2000) |
10 August 2022 |
31. |
EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) |
10 August 2022 |
32. |
EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) |
10 August 2022 |
33. |
EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) |
10 August 2022 |
34. |
EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) |
10 August 2022 |
35. |
EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) |
10 August 2022 |
36. |
EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) |
10 August 2022 |
37. |
EN ISO 4126-3:2006 Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006) |
10 August 2022 |
38. |
EN 1515-4:2009 Flanges and their joints – Bolting – Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
12 April 2023 |
39. |
EN 14222:2003 Stainless steel shell boilers |
12 April 2023 |
40. |
EN 10216-5:2013 Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 5: Stainless steel tubes |
21 June 2023 |
41. |
EN 10217-7:2014 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 7: Stainless steel tubes |
21 June 2023 |
42. |
EN 10222-2:2017 Steel forgings for pressure purposes – Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
21 June 2023 |
43. |
EN 10222-4:2017 Steel forgings for pressure purposes – Part 4: Weldable fine grain steels with high proof strength |
21 June 2023 |
44. |
EN 13445-1:2014 Unfired pressure vessels – Part 1: General EN 13445-1:2014/A1:2014 |
21 June 2023 |
45. |
EN 13445-4:2014 Unfired pressure vessels – Part 4: Fabrication |
21 June 2023 |
46. |
EN 13445-8:2014 Unfired pressure vessels – Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys EN 13445-8:2014/A1:2014 |
21 June 2023 |
47. |
EN 10253-2:2007 Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
3.4.2024 |
48. |
EN 12284:2003 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
3.4.2024 |
49. |
EN 12516-2:2014 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
3.4.2024 |
50. |
EN 12952-10:2002 Water-tube boilers and auxiliary installations - Part 10: Requirements for safeguards against excessive pressure |
3.4.2024 |
51. |
EN 12952-2:2011 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
3.4.2024 |
52. |
EN 12952-5:2011 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
3.4.2024 |
53. |
EN 12952-6:2011 Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
3.4.2024 |
54. |
EN 13121-1:2003 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions |
3.4.2024 |
55. |
EN 14917:2009+A1:2012 Metal bellows expansion joints for pressure applications |
3.4.2024 |
56. |
EN 3-8:2006 Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar EN 3-8:2006/AC:2007 |
3.4.2024 |
57. |
EN ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
3.4.2024 |