COUNCIL REGULATION (EC) No 3545/93 of 10 December 1993 temporarily suspending the autonomous Common Customs Tariff duty on certain industrial products (in the microelectronics and related sectors)

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty establishing the European Community, and in particular Article 28 thereof,

Having regard to the proposal from the Commission,

Whereas production of the products referred to in this Regulation is at present inadequate or non-existent within the Community and producers are thus unable to meet the needs of user industries in the Community;

Whereas it is in the Community's interest in certain cases to suspend the autonomous Common Customs Tariff duties only partially, particularly because of the existence of Community production, and in other cases to suspend them completely;

Whereas suspension of these autonomous duties shall be decided by the Community;

Whereas, taking account of the difficulties involved in accurately assessing the development of the economic situation in the sectors concerned in the near future, these suspension measures should be taken only temporarily, by fixing their period of validity by reference to the interests of Community production,

HAS ADOPTED THIS REGULATION:

Article 1

The autonomous Common Customs Tariff duties for the products listed in Annexes shall be suspended at the level indicated in respect of each of them.

These suspensions shall apply from 1 January to 30 June 1994.

Article 2

This Regulation shall enter into force on 1 January 1994.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 10 December 1993.

For the Council

The President

M. WATHELET

ANNEX

"" ID="1">ex 8471 93 51> ID="2">*30> ID="3">Drive-unit only for reading optical CD-ROM discs of the 5,25 inch type, for use in the manufacture of products falling within heading 8471(1) ()> ID="4">0"> ID="1">ex 8471 93 51> ID="2">*40> ID="3">Drive-unit for rewritable optical phase change discs of the 5,25 inch type, for use in the manufacture of peripheral storage units, with a total storage capacity not exceeding 1 gigabyte(2) ()> ID="4">0"> ID="1">ex 8471 93 51> ID="2">*50> ID="3">Drive-unit for magneto-optical discs of the 5,25 inch type, for use in the manufacture of peripheral storage units, with a total storage capacity not exceeding 2 gigabytes(3) ()> ID="4">0"> ID="1">ex 8471 93 59> ID="2">*30> ID="3">Disc storage unit of the 8 inch type, capable of parallel data-transfer via 1 channel at a rate per second of 3,041 megabytes, comprising a storage-module-drive (SMD) interface and 11 rigid magnetic discs with a total storage capacity, unformatted, not exceeding 2,5 gigabytes, for use in the manufacture of products falling within subheading 8471 91 80(4) ()> ID="4">0"> ID="1">ex 8471 93 59> ID="2">*40> ID="3">Disc storage unit of the 5,25 inch type, capable of external data-transfer at a rate per second of 7,5 megabytes, having dual channels for simultaneaously reading and writing with 2 magnetic heads, comprising a dual port interface circuit and 11 rigid magnetic discs with a total storage capacity, unformatted, of 1 986 megabytes, for use in the manufacture of products falling within subheading 9022 11 00(5) ()> ID="4">0"> ID="1">ex 8471 93 60> ID="2">*10> ID="3">Twin reel drive-unit of the 8 mm cartridge type, for use in the manufacture of magnetic tape storage units(6) ()> ID="4">0"> ID="1">ex 8471 99 80> ID="2">*10> ID="3">Optical reader for reading alphanumeric dot-matrix printing characters and converting them into electrical signals, comprising a read head containing an optical detector, an amplifier, a focusing lens and two lamps, linked by one or two flat cables to a central module the dimensions of which do not exceed 200 × 220 mm, comprising a printed circuit board on which are mounted a microprocessor, an image recognition circuit and an analogue-to-digital converter> ID="4">0"> ID="1">ex 8473 30 10> ID="2">*20> ID="3">Processor of ECL technology, consisting of not more than 336 monolithic integrated circuits, each comprising not more than 15 000 programmable logic arrays, mounted on one or both sides of a multiple printed circuit, contained in a housing attached to a cooling plate or enclosed between two cooling plates, the overall exterior dimensions of which do not exceed 148 × 560 × 594 mm and bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

001B-3035-H002

52-20361952-203621

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8473 30 10> ID="2">*50> ID="3">Assembly for disc storage units of Winchester technology, comprising a 2- or 4-channel read/write monolithic integrated circuit for magnetic head signals mounted with discrete components on a flexible printed circuit> ID="4">0"> ID="1">ex 8473 30 10> ID="2">*60> ID="3">Microprocessor of C-MOS technology, with a processing capacity of 32 bits, with a 32-bit external data-bus and a 32-bit external address-bus, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 48 × 48 mm, mounted on a printed circuit and with decoupling capacitors, with not more than 208 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures:

486

80386

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8473 30 10> ID="2">*70> ID="3">Microprocessor of C-MOS technology, with a processing capacity of 32 bits, coomprising a bus controller and a memory controller, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 48 × 48 mm, and with decoupling capacitors, with not more than 293 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

390 Z 50

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8473 30 10> ID="2">*80> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 32 bits, comprising 2 random-access memories (RAMs) with a total storage capacity of 64 Kbits and a read only memory, non-programmable (ROM) with a storage capacity of 128 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 69 × 74 mm, and with decoupling capacitors, with not more than 325 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

320 C 40

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8473 30 90> ID="2">*15> ID="3">Metal ball coated with plastic or rubber material, with a diameter not exceeding 26 mm and a weight of 38 g or more, for use in the manufacture of a pointing device (so-called 'mouse')(7) ()> ID="4">0"> ID="1">ex 8473 30 90> ID="2">*20> ID="3">Ferrite magnetic heads of Winchester technology, for hard disc file-peripherals as well as carrying arms equipped with such magnetic heads, capable of recording to a density of 10 tracks or more per mm> ID="4">0"> ID="1">ex 8473 30 90> ID="2">*25> ID="3">Pointing device (so-called 'trackball'), the exterior dimensions of which do not exceed 17 × 27 × 47 mm, with a weight not exceeding 31 g, consisting of printed circuit on which are mounted an optical encoder in the form of a monolithic integrated circuit and a housing comprising a ball with a diameter not exceeding 19 mm and a retainer ring, for use in the manufacture of products falling within subheading 8471 20 20(8) ()> ID="4">0"> ID="1">ex 8473 30 90> ID="2">*30> ID="3">Read/write assembly for hard disc storage units, comprising ferrite magnetic heads of Winchester technology, mounted on a carrier arm, connected via a flexible printed circuit to a metal bracket upon which are mounted:

- a flexible printed circuit upon which is mounted an amplifier for read/write signals, in the form of an integrated circuit,

- a printed circuit socket> ID="4">0"> ID="1">ex 8473 30 90> ID="2">*45> ID="3">Rotor arm without electronic components, for read/write assemblies of hard disc storage units> ID="4">0"> ID="1">ex 8473 30 90> ID="2">*55> ID="3">Data storage assembly (Head/Disc/Assembly) for disc storage units, with a data transfer rate per second of 4,2 megabytes, comprising read/write heads and 9 rigid magnetic discs with an external diameter not exceeding 24,2 cm (9,5 inch) with a total storage capacity, formatted, of 2 838 megabytes, the whole incorporated in a single hermetically sealed housing> ID="4">0"> ID="1">ex 8473 30 90> ID="2">*60> ID="3">Data storage assembly (Head/Disc/Assembly) for disc storage units of the 9 inch type, with a data transfer rate per second of 2,77 megabytes, comprising read/write heads and 7 rigid magnetic discs with a total storage capacity, formatted, of 1 216 or 1 506 megabytes, the whole incorporated in a single hermetically sealed housing> ID="4">0"> ID="1">ex 8501 10 99> ID="2">*53> ID="3">DC motor, brushless, with a typical running torque of 0,00025 Nm (±0,00005 Nm), with a coupling flange of a diameter of 6,8 mm (±0,1 mm) and a chuck of a diameter of 12 mm (±1 mm), with an external rotor, a three-phase winding, a rated speed of 4 800 (±1 %) rpm and a supply voltage of 4 V (±25 %)> ID="4">0"> ID="1">ex 8501 10 99> ID="2">*54> ID="3">DC motor, with brushes, with a typical running torque of 0,0015 Nm (±0,0005 Nm), with a shaft of a diameter of 2 mm (±0,004 mm), with an internal rotor, a rated speed of 2 050 (±11 %) rpm and a supply voltage of 2,5 V (±60 % ou -60 %/+140 %)> ID="4">0"> ID="1">ex 8501 10 99> ID="2">*55> ID="3">DC motor, with brushes, with a typical running torque of 0,0058 Nm (±0,001 Nm), with a chuck of a diameter of 2 mm (±0,004 mm), with an internal rotor, a rated speed of 2 270 (±10 %) rpm and a supply voltage of 4,5 V (-67 %/+100 %)> ID="4">0"> ID="1">ex 8501 10 99> ID="2">*56> ID="3">DC motor, brushless, with an operating torque of 0,0123 Nm/A or more but not exceeding 0,0136 Nm/A, with a coupling flange of a diameter of 12,7 mm (±0,2 mm) and a chuck of a diameter of 38,91 mm (±0,05 mm), with a rated speed of 5 400 (±0,1 %) rpm and a supply voltage of 11 V (±10 %)> ID="4">0"> ID="1">ex 8501 10 99> ID="2">*57> ID="3">DC motor, brushless, with a typical running torque not exceeding 0,0025 Nm, with a coupling flange of a diameter of 27,5 mm (±0,5 mm), a coupling flange of a diameter of 15 mm (±0,5 mm) and a chuck of a diameter of 25 mm (±0,5 mm), with an internal rotor, a three-phase winding, a rated speed of 3 833 (±0,1 %) rpm and a supply voltage of 12 V (±5 %)> ID="4">0"> ID="1">ex 8504 40 98> ID="2">*10> ID="3">Direct current to direct current converter, with an input voltage range not exceeding 390 V, contained in a housing with not more than 16 connections> ID="4">0"> ID="1">ex 8517 90 81> ID="2">*20> ID="3">16 × 16- or32 × 32-bit differential crosspoint switch of GaAs technology, capable of switching at a data rate per second of at least 800 Mbits, in the form of a monolithic integrated circuit contained in a housing combined with decoupling capacitors, the whole mounted on a substrate the exterior dimensions of which do not exceed 35 × 35 mm, with not more than 196 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

TQ 8016

TQ 8032or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8517 90 92> ID="2">*10> ID="3">Electronic assembly for a thermal printer head, consisting only of conductor elements, monolithic integrated circuits and at least 8 640 heater elements, the whole mounted on a ceramic substrate the exterior dimensions of which do not exceed 3 × 61 × 271 mm> ID="4">0"> ID="1">ex 8518 30 90> ID="2">*10> ID="3">Headphone and earphone for hearing aids, contained in a housing the exterior dimensions of which, excluding connecting points, do not exceed 5 × 6 × 8 mm> ID="4">0"> ID="1">ex 8522 90 91> ID="2">*92> ID="3">Electronic assembly for a laser read-head of a compact disc player, comprising:

- a flexible printed circuit,

- a photo-detector, in the form of a monolithic integrated circuit, contained in a housing,

- 2 connectors,

- not more than 1 transistor,

- not more than 3 variable and 4 fixed resistors,

- not more than 5 capacitors,

the whole mounted on a support> ID="4">0"> ID="1">ex 8522 90 99> ID="2">*92> ID="3">Thinfilm recording/reproducing device fixed on a non-magnetic substrate, having 9 parallel channels for digital signals and 2 channels for analogue signals, for use in the manufacture of magnetic heads for digital sound recording and digital/analogue sound reproducing apparatus of the cassette-type(9) ()> ID="4">0"> ID="1">ex 8528 20 20> ID="2">*10> ID="3">Video monitor comprising:

- a flat screen monochrome cathode-ray tube with a diagonal measurement of the screen not exceeding 110 mm and equipped with a deflector yoke, and

- a printed circuit on which are mounted a deflection unit, a video-amplifier and a transformer,

the whole mounted on a chassis, for the manufacture of video entry-phones, video telephones or surveillance apparatus(10) ()> ID="4">0"> ID="1">ex 8529 90 98> ID="2">*93> ID="3">Voltage-controlled oscillator, having an oscillation-frequency of 915 MHz or more at 4,5 V and not exceeding 890 MHz at 1 V, contained in a housing the exterior dimensions of which do not exceed 5 × 10 × 15 mm, with not more than 4 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

VW995S05

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8529 90 98> ID="2">*94> ID="3">Assembly consisting of a lens unit, having an adjustable focal length of 5,7 mm or more but not exceeding 65 mm and comprising a zoom encoder, a stepping motor unit, a zoom motor unit, an iris motor unit and a photo interrupter> ID="4">0"> ID="1">ex 8529 90 98> ID="2">*95> ID="3">Video recording and reproducing assembly, comprising a tape deck mechanism of the cassette type, comprising a DC motor, for use in the manufacture of products falling within heading 8525(11) ()> ID="4">0"> ID="1">ex 8529 90 98> ID="2">*96> ID="3">Assembly comprising a lens unit, having a focal length of 3,6 mm, an interline charge-coupled image sensor having 291 000 photosensitive cells, and integrated circuits, the whole mounted on 2 printed circuits linked via a cable> ID="4">0"> ID="1">ex 8529 90 98> ID="2">*97> ID="3">Assembly consisting of a monochrome cathode-ray tube with a diagonal measurement of the screen of 165 mm or more but not exceeding 230 mm and a concave focus lens mounted on a liquid-filled cooling armature, for use in the manufacture of television projection equipment(12) ()> ID="4">0"> ID="1">ex 8531 20 51> ID="2">*10> ID="3">Liquid crystal display (LCD) with an active matrix and 640 × 480 pixels (colour), consisting of a layer of liquid crystals between two glass sheets or plates, mounted on a printed circuit board comprising electronic components providing drive and/or control functions> ID="4">0"> ID="1">ex 8531 20 59> ID="2">*10> ID="3">Liquid crystal display (LCD) with an active matrix and 640 × 400 or 640 × 480 pixels (monochrome), consisting of a layer of liquid crystals between two glass sheets or plates, mounted on a printed circuit board comprising electronic components providing drive and/or control functions> ID="4">0"> ID="1">ex 8531 20 80> ID="2">*10> ID="3">Passive liquid crystal display (LCD), consisting of a layer of liquid crystals between two glass sheets or plates with 256 000 dots or more, mounted on a printed circuit board comprising electronic components providing drive and/or control functions> ID="4">0"> ID="1">ex 8531 90 00> ID="2">*91> ID="3">Backlight unit, comprising a lampholder with a cathode tube, a reflection sheet and a diffuse substrate, the exterior dimensions of which do not exceed 7 × 250 × 300 mm, for use in the manufacture of liquid crystal displays (LCD)(13) ()> ID="4">0"> ID="1">ex 8533 40 10> ID="2">*91> ID="3">Potentiometer consisting of carbon resistors with a total resistance of 20 Kohm or more but not exceeding 250 Kohm, fitted with a DC motor having an operating current of 150 mA at 4,5 V> ID="4">0"> ID="1">ex 8534 00 19> ID="2">*94> ID="3">Printed circuit, consisting of 31 conductor elements fixed on a flexible plastic film, for use in the manufacture of magnetic heads for digital sound recording and digital/analogue sound reproducing apparatus of the cassette-type(14) ()> ID="4">0"> ID="1">ex 8534 00 19> ID="2">*95> ID="3">Printed circuit, consisting of conductor elements fixed on a flexible plastic film, with a trace width of 0,095 mm or more but not exceeding 0,155 mm and a trace pitch of 0,095 mm or more but not exceeding 0,305 mm, for use in the manufacture of electronic calculating machines(15) ()> ID="4">0"> ID="1">ex 8534 00 90> ID="2">*93> ID="3">Printed circuit on one or both sides of a ceramic substrate, consisting of conductor elements, contacts and resistors, incorporating connections isolated in vitrified layers, the dimensions of which do not exceed 45 × 45 mm, with not more than 550 connections> ID="4">0"> ID="1">ex 8536 50 19> ID="2">*92> ID="3">Membrane switch on a multilayer flexible plastic film, consisting of a layer with silver conductor patterns, a layer of graphite conductor patterns, a layer with a dielectric pattern, a layer with a pattern of silver interconnections (jumpers) and a layer with a solder pattern, for use in the manufacture of electronic calculating machines(16) ()> ID="4">0"> ID="1">ex 8536 50 90> ID="2">*92> ID="3">Reed switch having a switching power of 20 W or more within the range of 17-43 A.turn, in the form of a glass capsule, not containing mercury, the dimensions of which do not exceed 3 × 21 mm, for use in the manufacture of automotive airbag shock-sensors(17) ()> ID="4">0"> ID="1">ex 8536 90 80> ID="2">*91> ID="3">Elastomeric connectors, consisting of conductor elements coated with gold and fixed on a substrate of rubber> ID="4">0"> ID="1">ex 8540 30 10> ID="2">*36> ID="3">Colour cathode-ray tube with a slit mask, having a distance between stripes of the same colour of less than 0,35 mm and a diagonal measurement of the screen not exceeding 53 cm> ID="4">0"> ID="1">ex 8540 30 90> ID="2">*27> ID="3">Flat screen monochrome cathode-ray tube with a diagonal measurement of the screen of 310 mm or more but not exceeding 330 mm> ID="4">0"> ID="1">ex 8540 91 00> ID="2">*92> ID="3">Slit mask, consisting of vertical slits with a distance between slits of 0,78 mm (±0,08 mm) and a diagonal dimension of either 61,5 cm (±0,5 cm) or 71 cm (±0,5 cm) or 79,5 cm (±0,5 cm)> ID="4">0"> ID="1">ex 8541 60 00> ID="2">*93> ID="3">Piezo-electric crystal oscillating at a frequency of 4 MHz or more but not exceeding 60 MHz, contained in a housing of the SMD (Surface mounted device) type and with not more than 4 connections> ID="4">0"> ID="1">ex 8542 11 01> ID="2">*11> ID="3">Wafer, not yet cut into chips, consisting only of microcontrollers or microcomputers of C-MOS technology, with a processing capacity of 8 bits, providing servo control functions, comprising a read only memory, non-programmable (ROM) with a storage capacity of 128 Kbits, 2 random-access memories (RAMs) with a total storage capacity of 3 Kbits and a timer unit, for the manufacture of goods of subheading 8542 11 71 contained in a housing the exterior dimensions of which do not exceed 15 × 21 mm, with not more than 80 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

PD 78134

- other identification markings relating to devices complying with the abovementioned description(18) ()> ID="4">0"> ID="1">ex 8542 11 01> ID="2">*40> ID="3">Wafer, not yet cut into chips, consisting only of microprocessors with an arithmetic-logic unit (AlU) with a processing capacity of 16 bits and an 8-bit data-bus, comprising a random-access memory (RAM) with a storage capacity not exceeding 2 Kbits but not comprising a read only memory, non-programmable (ROM), for the manufacture of goods of subheading 8542 11 64 contained in a housing the exterior dimensions of which do not exceed 18 × 59 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

78C10

- other identification markings relating to devices complying with the abovementioned description(19) ()> ID="4">0"> ID="1">ex 8542 11 01> ID="2">*60> ID="3">Wafer, not yet cut into chips, consisting only of microcontrollers or microcomputers with a processing capacity of 4 bits, for the manufacture of goods of subheading 8542 11 71 contained in a housing the exterior dimensions of which do not exceed 24 × 59 mm, with not more than 80 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

7507

7508

75004

75006

75108

75112

75116

75216

75217

75304

75306

75308

75312

75316

75512

75516

75P216

75P308

75P316

- other identification markings relating to devices complying with the abovementioned description(20) ()> ID="4">0"> ID="1">ex 8542 11 01> ID="2">*70> ID="3">Wafer, not yet cut into chips, consisting only of display controllers and character generators (DCCG), for liquid-crystal dot-matrix display system, for the manufacture of goods of subheading 8542 11 82 contained in a housing the exterior dimensions of which do not exceed 24 × 26 mm, with not more than 80 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures:

7228

7229

- other identification markings relating to devices complying with the abovementioned description(21) ()> ID="4">0"> ID="1">ex 8542 11 01> ID="2">*80> ID="3">Wafer, not yet cut into chips, consisting only of a programmable logic device, for the manufacture of goods of subheading 8542 11 80 contained in a housing the exterior dimensions of which do not exceed 64 × 64 mm, with not more than 300 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

XC 2018

XC 2064

XC 3020

XC 3030

XC 3042

XC 3064

XC 3090

XC 4002

XC 4003

XC 4004

XC 4005

XC 4006

XC 4008

XC 4010

XC 4013

XC 4016

XC 4020

- other identification markings relating to devices complying with the abovementioned description(22) ()> ID="4">0"> ID="1">ex 8542 11 16> ID="2">*01> ID="3">Pseudo-static random-access memory of C-MOS technology (C-MOS PS-RAM), with a storage capacity of 4 Mbits and an access time not exceeding 100 ns, comprising a timing pulse generator and a refresh control circuit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12 × 22 mm, with not more than 32 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

HM 658512

- other identification markings relating to devices complying with the abovementioned description

These devices are for the manufacture of portable computers, capable of operating without an external source of power(23) ()> ID="4">0"> ID="1">ex 8542 11 16> ID="2">*02> ID="3">Dynamic random-access memory of C-MOS technology (C-MOS D-RAM), with a storage capacity of 256 K × 16 bits and an access time not exceeding 80 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11 × 27 mm, with not more than 40 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MT 4C16256

PD 424260PD 424170

- other identification markings relating to devices complying with the abovementioned description

> ID="4">10"> ID="1">ex 8542 11 16> ID="2">*03> ID="3">Dual port dynamic random-access memory of C-MOS technology (C-MOS D-RAM), with a serial read output control, with a storage capacity of 2 Mbits or more but not exceeding 4 Mbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 52 mm, with not more than 64 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

HM 538253

HM 5316123

M5M482256

MB 818251

MT 42C256

MT 42C8254

MT 42C8255

MT 42C8256

PD 482234

PD 482235

TC 524162

TC 524165

TC 528257

TC 528267

TMS 55160

TMS 55165

- other identification markings relating to devices complying with the abovementioned description

> ID="4">0"> ID="1">ex 8542 11 16> ID="2">*04> ID="3">Dynamic random-access memory of C-MOS technology (C-MOS D-RAM), with a storage capacity of 240 K × 12 bits, with separate in- and outputs and serial shift registers (so-called field memories), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10 × 19 mm, with not more than 36 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TMS 4C2970

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 18> ID="2">*01> ID="3">Dynamic random-access memory of C-MOS technology (C-MOS D-RAM), with a storage capacity of 256 K × 18 bits and an access time not exceeding 80 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11 × 27 mm, with not more than 40 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

PD 424280

- other identification markings relating to devices complying with the abovementioned description

> ID="4">10"> ID="1">ex 8542 11 18> ID="2">*02> ID="3">Dynamic random-access memory of C-MOS technology (C-MOS D-RAM), with a storage capacity of 512 K × 9 bits and an access time not exceeding 100 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12 × 19 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TMS 44900

- other identification markings relating to devices complying with the abovementioned description

> ID="4">10"> ID="1">ex 8542 11 21> ID="2">*12> ID="3">Static random-access memory (S-RAM) with a storage capacity not exceeding 4 Kbit, superimposed bit-for-bit on an electrically erasable, programmable, read only memory (E2PROM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 39 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

X 2001

X 2002X 2004

X 2201 AX 2210

X 2212X 2443

X 2444

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 21> ID="2">*13> ID="3">Static random-access memory (S-RAM) with a storage capacity of 16 Kbits, superimposed bit-for-bit on an electrically erasable, programmable, read only memory (E2PROM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16 × 43 mm, with not more than 32 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

X 20C16

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 21> ID="2">*14> ID="3">Static random-access cache memory of BiMOS technology (BiMOS S-Cache-RAM), with a storage capacity of 64 Kbits and an access time not exceeding 12 ns, comprising an 8-bit address comparator, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8 × 19 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

IDT 71B74

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 21> ID="2">*15> ID="3">Static random-access memory of MOS technology combined with ECL technology, with a storage capacity of 64 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11 × 37 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

10C494-15

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 21> ID="2">*16> ID="3">Static random-access memory of C-MOS technology (C-MOS S-RAM), with a storage capacity of 16 Kbits, comprising a 5-bit bidirectionnal in-/output port and an universal asynchronous receiver/transmitter (UART), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 34 mm, with not more than 24 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

75012SC121

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 21> ID="2">*18> ID="3">Dual port static random-access memory of BiMOS technology (BiMOS dual port S-RAM), with a storage capacity of 36 Kbits and an access time not exceeding 35 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29 × 29 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CY7B139

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 21> ID="2">*37> ID="3">Non-volatile static random access memory of C-MOS technology (C-MOS non-volatile S-RAM), with a capacity of 16 Kbits and an internal energy source, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19 × 40 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

DS 1220 Y

MK 48 Z 02

MK 48 Z 12

MKI 48 Z 02

MKI 48 Z 12

- other identification markings relating to devices complying with the abovementioned description> ID="4">7"> ID="1">ex 8542 11 21> ID="2">*42> ID="3">Static random-access memory of C-MOS technology (C-MOS S-RAM), with a storage capacity of 32 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20 × 63 mm, with not more than 52 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

IDT 7134

TC 5532

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 23> ID="2">*02> ID="3">Dual port static random-access memory of BiMOS technology (BiMOS dual port S-RAM), with a storage capacity of 72 Kbits and an access time not exceeding 35 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29 × 29 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CY7B145

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 23> ID="2">*21> ID="3">Non-volatile static random-access memory of C-MOS technology (C-MOS non-volatile S-RAM), with a storage capacity of 256 Kbits and an internal energy source, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19 × 40 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

BQ 4011

DS 1230MK 48 Z 30MK 48 Z 32

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 23> ID="2">*23> ID="3">Static random access memory of C-MOS technology (C-MOS S-RAM), with a storage capacity of 32 K × 8 bits, a standby current not exceeding 25 mA and an access time exceeding 55 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 9 × 12 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CXK 58257

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 23> ID="2">*24> ID="3">Static random-access memory of BiMOS technology (BiMOS S-RAM), with a storage capacity of 256 Kbits and an access time not exceeding 20 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 21 × 38 mm, with not more than 52 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CY7B153

CY7B154

CY7B155

CY7B156

CY7B191

CY7B192

CY7B194

CY7B195

CY7B196

CY7B197

CY7B198

CY7B199

HM 6709 A

MCM 6708

MCM 6709

TC 55B328

TC 55B464

TC 55B465

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 25> ID="2">*01> ID="3">Static random-access memory of BiMOS technology (BiMOS S-RAM), with a storage capacity of 288 Kbits and an access time not exceeding 40 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20 × 41 mm, with not more than 52 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CY7B173

CY7B174PD 46730TC 55B329

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 25> ID="2">*08> ID="3">Static random-access cache memory of BiMOS technology (BiMOS S-Cache-RAM), with a total storage capacity of 320 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26 × 26 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including one of the following combination of figures and letters:

PD 46710

PD 46741

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 25> ID="2">*10> ID="3">Static random-access memory (S-RAM), with a storage capacity of 1 Mbit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 47 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXK581020

CY7C101

CY7C102

CY7C106

CY7C107

CY7C108

CY7C109

EDI 88128

HM 621100A

HM 624256

HM 624257

M5M 51004

M5M 51008

MCM 6228

MT 5C1008

TC 551001

TC 55B4256

TC 55B4257

TC 55B8128

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 25> ID="2">*12> ID="3">Non-volatile static random-access memory of C-MOS technology (C-MOS non-volatile S-RAM), with a storage capacity of 1 Mbit and an internal energy source, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19 × 44 mm, with not more than 32 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

BQ 4013

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 25> ID="2">*13> ID="3">Static random-access memory of C-MOS technology (C-MOS S-RAM), operating at a power supply of 3,3 V (±0,3 V), with a storage capacity of 288 Kbits and an access time not exceeding 35 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 9 × 41 mm, with not more than 32 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CY7C1388

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 27> ID="2">*03> ID="3">Non-volatile static random-access memory of C-MOS technology (C-MOS non-volatile S-RAM), with a storage capacity exceeding 1 Mbit, with an internal energy source, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19 × 54 mm, with not more than 40 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

BQ 4014

BQ 4015BQ 4024BQ 4025

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 27> ID="2">*04> ID="3">Static random-access memory of C-MOS technology (C-MOS S-RAM), with a storage capacity of 64 K × 18 bits or of 128 K × 9 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20 × 22 mm, with not more than 52 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXK 77910

CY7C1031CY7C1032

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 27> ID="2">*05> ID="3">Static random-access memory of BiMOS technology (BiMOS S-RAM), with a storage capacity of 64 K × 18 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 21 × 21 mm, with not more than 52 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MCM 67A618

MCM 67C618

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 27> ID="2">*06> ID="3">Static random-access memory of C-MOS technology (C-MOS S-RAM), with a storage capacity of 4 Mbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12 × 28 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

TC 554002

MT5C1M4B2

MT5C256K16B2

MT5C512K8B2

MT5LC1M4D4

MT5LC256K16D4

MT5LC512K8D4

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">8542 11 31> ID="2"" ID="3">Read only memory, non-programmable (ROM)> ID="4">0"> ID="1">ex 8542 11 42> ID="2">*02> ID="3">UV erasable, programmable, read only memory (EPROM) of N-MOS (including H-MOS) technology (N/H-MOS EPROM), with a storage capacity not exceeding 256 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14 × 39 mm, with a quartz window on the upper surface and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

M 2716

M 2732 AM 2764M 27128M 27256

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 42> ID="2">*03> ID="3">Flash electrically erasable, programmable, read only memory (Flash-E2PROM) with a storage capacity of 16 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 9 × 14 mm, with not more than 18 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TMS 29 F 816

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 42> ID="2">*04> ID="3">UV erasable, programmable, read only memory (EPROM) of C-MOS technology (C-MOS EPROM), with a storage capacity of 16 K × 16 bits, comprising a 5-bit gate only for reading, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 34 mm, with a quartz window on the upper surface and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

N 73120FRN

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 42

ex 8542 11 59> ID="2">*21

*61> ID="3"> UV erasable or non-erasable, programmable, read only memory (EPROM or PROM), with a storage capacity of 256 Kbits and an access time of less than 80 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18 × 39 mm, with not more than 44 connections, with or without a quartz window on the upper surface and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CY 7C 270

CY 7C 271

CY 7C 274

CY 7C 275

CY 7C 276

CY 7C 277

CY 7C 279

XC 17256

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 44> ID="2">*02> ID="3">UV erasable, programmable, read only memory (EPROM) of N-MOS (including H-MOS) technology (N/H-MOS EPROM), with a storage capacity of 512 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14 × 39 mm, with a quartz window on the upper surface and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

M 27512

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 44

ex 8542 11 59> ID="2">*03

*01> ID="3">UV erasable or non-erasable, programmable, read only memory (EPROM or PROM) with a storage capacity of 1 Mbit, comprising address and data latches, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16 × 38 mm, with not more than 32 connections, with or without a quartz window on the upper surface and bearing :

- an identification marking consisting of or including one of the following combinations of figures and letters:

TMS 87C110

TMS 87PC110

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 44

ex 8542 11 59> ID="2">*04

*04> ID="3"> UV erasable or non-erasable, programmable, read only memory (EPROM or PROM), with a storage capacity of 512 Kbits, comprising address and data latches, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16 × 38 mm, with not more than 32 connections, with or without a quartz window on the upper surface and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

TMS 87C510

TMS 87PC510

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 44> ID="2">*05> ID="3">UV erasable, programmable, read only memory (EPROM) of C-MOS technology (C-MOS EPROM), with a storage capacity of 448 Kbits and an access time not exceeding 170 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 34 mm, with a quartz window on the upper surface and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

N 70413FEC-A

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 46> ID="2">*01> ID="3">Flash electrically erasable, programmable, read only memory (Flash-E2PROM) with a storage capacity of 2 Mbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 42 mm, with not more than 56 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

28 F 002

28 F 02028 F 200

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 50> ID="2">*01> ID="3">Electrically erasable, programmable, read only memory (E2PROM), with a storage capacity of 256 Kbits or more, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19 × 52 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

28256

28 C 256

28 C 512

48 C 256

AT 28C1024

E/M 28C010

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 50> ID="2">*03> ID="3">Electrically erasable, programmable, read only memory (E2PROM) of C-MOS or N-MOS (including H-MOS) technology, capable of byte-wide (parallel) write operations, with a storage capacity of 2 K × 8 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 42 mm, with not more than 32 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

X 2816C

X 28 C 16

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 50> ID="2">*06> ID="3">Electrically erasable, programmable, read only memory (E2PROM), with a storage capacity of 8 K × 8 bits and a byte or page write cycle time not exceeding 2 ms, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 39 mm, with not more than 32 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

AT 28 C 64

AT 28 PC 64AT 28 HC 64

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 59> ID="2">*03> ID="3">Write buffer memory of C-MOS technology, with an organisation of 4 × 16 bits comprising eight bits of address and eight bits of data, and four-bit parity, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31 × 31 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

79 R 2020 A

79 R 3020R 2020/16

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 59> ID="2">*05> ID="3">Programmable, non-erasable, read only memory (PROM) of C-MOS technology (C-MOS PROM), with a storage capacity not exceeding 32 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18 × 44 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CY7C225

CY7C235

CY7C258

CY7C259

CY7C281

CY7C282

XC 1718

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 59> ID="2">*06> ID="3">Memory register of C-MOS technology, with a storage capacity of 1 Mbit, comprising an address generator providing serial read/write operation, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 9 × 14 mm, with not more than 18 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MSM 6389

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 59> ID="2">*07> ID="3">FIFO (first in, first out) read/write memory of C-MOS technology, for simultaneous reading and writing in one clock signal, with a storage capacity of 2 K × 18 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 21 × 63 mm, with not more than 52 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CY7C447

CY7C457MT 53C2K18C3

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 59> ID="2">*27> ID="3">FIFO (first in, first out) read/write memory of C-MOS technology, for simultaneous reading and writing in one clock signal or bidirectional operation, with a storage capacity of 9 or 18 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 21 × 63 mm, with not more than 52 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CY7C439

CY7C443

CY7C445

CY7C446

CY7C453

CY7C455

CY7C456

IDT 72021

IDT 72031

MT 53C51218A1

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 62> ID="2">*02> ID="3">Microprocessor of C-MOS technology, with a processing capacity of 8 bits, capable of controlling a compact disc player, providing digital servo-command control, comprising a random-access memory (RAM) with a storage capacity of 32 Kbits, a phase-locked loop circuit, an oversampling filter, a servo-command generator, an error correction circuit, an analogue-to-digital converter, a demodulator and a central processing unit (CPU) interface circuit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 21 mm, with not more than 100 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters :

CXD 2515Q

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 62

ex 8542 11 64

ex 8542 11 67

ex 8542 11 68> ID="2">*03

*03

*01> ID="3"> Floating-point arithmetic co-processor, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 46 × 53 mm, with not more than 208 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

3171

74 ACT 8847

79 R 2010

79 R 3010

80287

80387

8087

80C287

CY 7C 602

MC 68881

MC 68882

NCR 32020

NS 32081

NS 32381

R 2010/16

TX 32081 W

US 83C87

US 83S87

WTL 3167

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 62> ID="2">*04> ID="3">Microprocessor of C-MOS technology, with a processing capacity of 8 bits, comprising a 16-bit digital signal processor, an 8-bit arithmetic-logic unit (ALU), a random-access memory (RAM) with a storage capacity of 4 Kbits and having the function of programme memory, 2 random-access memories (RAMs) with a total storage capacity of 2 Kbits and 256 registers, in the form of a monolithic intergrated circuit, contained in a housing the exterior dimensions of which do not exceed 30 × 30 mm, with not more than 100 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

Z 86C95

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 62> ID="2">*05> ID="3">Microprocessor of C-MOS technology, with a processing capacity of 8 bits, providing keyboard control functions, comprising an 8-bit configuration register, a random-access memory (RAM) with a storage capacity of 16 Kbits and having the function of programme memory, a random-access memory (RAM) with a storage capacity of 2 Kbits and a real-time clock, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26 × 26 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters :

PC 87911

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 62> ID="2">*06> ID="3">Microprocessor of C-MOS technology, with a processing capacity of 8 bits, comprising a random-access memory (RAM) with a storage capacity of 4 Kbits, a serial peripheral interface circuit, a serial communications interface circuit and a 16-bit timer, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31 × 31 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MC68HC11EDO

MC68HC11FSC414950FB

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 64> ID="2">*04> ID="3">Microprocessor of N-MOS (including H-MOS) technology, with a processing capacity of 16 bits, comprising a random-access memory (RAM) with a storage capacity of 1 920 bits and a 13-channel analogue-to-digital converter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25 × 25 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

76005 CN

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 67> ID="2">*02> ID="3">Microprocessor of C-MOS technology, with a processing capacity of 32 bits, comprising 16-bit data-buses and a 16 × 16 bits multiplier with 32 bits results, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 40 × 64 mm, with not more than 240 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters :

ST 18931

ST 18932

ST 18941

ST 18R942

TMS320M500

TMS 320M520

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 67> ID="2">*04> ID="3">Microprocessor of C-MOS technology, with a processing capacity of 32 bits, comprising an integer unit with 136 registers and a floating point unit with 32 registers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 46 × 46 mm, with not more than 207 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

W 8701

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 67> ID="2">*06> ID="3">Microprocessor of C-MOS technology, with a processing capacity of 32 bits, comprising a 32-bit external address-bus, a 64-bit external data-bus and six 80-bit internal data-busses, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 53 × 53 mm, with not more than 304 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MC 88110

- other identification marking relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 67> ID="2">*35> ID="3">Microprocessor of C-MOS technology, with a processing capacity of 32 bits, with a 32- or 64-bit external data-bus and a 32-bit external address-bus, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 48 × 48 mm, with not more than 304 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

486

80386

80486

79R2000A

79 R 3000

AM 29000

CY7C601

L 64801

MC 68020

MC 68030

MC 68040

MPC 601

NS 32532

NS 32C 032

R 2000/16

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 67> ID="2">*37> ID="3">Microprocessor of C-MOS technology, with a processing capacity of 32 bits, comprising a bus controller and a memory controller, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 48 × 48 mm, with not more than 293 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

390 Z 50

80386 SL

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 68> ID="2">*31> ID="3">Microprocessor of C-MOS technology, with a processing capacity of 64 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 62 × 62 mm, with not more than 447 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

21064

80860R 4000R 4300R 4400

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71

ex 8542 11 91> ID="2">*01

*03> ID="3"> Microcontroller or microcomputer with a processing capacity of 4 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 24 × 60 mm, with not more than 100 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CD 3200 - 3299

HD 38800

HD 38820

HD 404189

HD 404019

HD 404608

HD 404629

HD 404639

HD 404919

HD 4074019

HD 4074608

HD 4074629

HD 4074639

HD 44750

HD 44796

HD 44800

HD 44801

HD 44820

HD 44840

HD 44860

HD 614042

HD 614080

MN 1584531

PD 17203A

PD 17204

SMC 6214

SMC 6215

SMC 6234

SMC 6266

SMC 62 L 34

T 6978

T 7767 BS

TCM 8301

TCM 8302

TMC 0270 - 0279

TMC 0500 - 0599

TMC 0980 - 0989

TMC 1500 - 1599

TMC 17

TMC 1980 - 1999

TMP 47 C 1670

TMP 47 C 200

TMP 47 C 220

TMP 47 C 221

TMP 47 C 452

TMP 47 C 456

TMP 47 C 670

TMP 47 C 855

TMP 47 C 858

TMP 47 P 1670

TMP 47 P 855

TMP 47 P 860 E

TP 0310 - 03299

TP 0450 - 04599

TP 0480 - 04899

TP 0500 - 05999

TSS 200

TSS 400

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*08> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a read only memory, non-programmable (ROM) with a storage capacity of 160 Kbits, a random-access memory (RAM) with a storage capacity of 4 992 bits, a random-access memory (RAM) with a storage capacity of 640 bits, an 8-channel analogue-to-digital converter, a serial interface circuit with a FIFO (first in, first out) read/write memory, 4 timers, a display control and driver circuit, and a clockgenerator, in the form of a monolithic intergrated circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 21 mm, with not more than 80 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CXP 82320

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*09> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, providing control and interface functions for a keyboard, comprising of a read only memory, non-programmable (ROM) with a storage capacity of 64 Kbits, a random-access memory (RAM) with a storage capacity of 2 Kbits and an analogue-to-digital converter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 23 × 23 mm, with not more than 100 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

80C51 SL

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*10> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, providing remote control functions, comprising a read only memory, non-programmable (ROM) with a storage capacity not exceeding 64 Kbits, a random-access memory (RAM) with a storage capacity not exceeding 512 bits, an oscillator and a modulator, in the form of a monolithic intergrated circuit, contained in a housing the exterior dimensions of which do not exceed 20 × 40 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

PCA 84C122

PCA 84C222PCA 84C422PCA 84C822

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*11> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, for text data decoding and display, comprising a read only memory, non-programmable (ROM) with a storage capacity of 8 Kbits, a read only memory, non-programmable (ROM) with 120 character fonts and a random-access memory (RAM) with a storage capacity not exceeding 2 304 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18 × 59 mm, with not more than 64 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CF 72307

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*13> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a read only memory, non-programmable (ROM) with a storage capacity of 127 or 128 Kbits, a random-access memory (RAM) with a storage capacity of 2 Kbits or 4 992 bits, a serial interface circuit and a display control and drive circuit, in the form of a monolithic intergrated circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 21 mm, with not more than 80 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXP 82316

PD 75316

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*14> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, providing servo control functions, comprising a read only memory, non-programmable (ROM) with a storage capacity of 128 Kbits, 2 random-access memories (RAMs) with a total storage capacity of 3 Kbits and a timer unit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 21 mm, with not more than 80 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

PD 78134

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*15> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a read only memory, non-programmable (ROM) with a storage capacity of 64 or 128 Kbits, a random-access memory (RAM) with a storage capacity of 4 or 8 Kbits, 2 16-bit timer/counters, 2 17-bit timing pulse generators and a universal synchronous and asynchronous receiver/transmitter (USART), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30 × 30 mm, with not more than 84 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

C 1900

C 2900C 3900

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*28> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a random-access memory (RAM) with a storage capacity not exceeding 2 Kbits, a programmable, non-erasable, read only memory (PROM) or a UV erasable, programmable, read only memory (EPROM) with a storage capacity of 64 Kbits or a read only memory, non-programmable (ROM) with a storage capacity of 32 or 64 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 52 × 63 mm, with not more than 72 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

77 C 82

80 C 152M 50743M 50747

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*31> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a random-access memory (RAM) with a storage capacity of 3 Kbits or more but not exceeding 8 Kbits, either a read only memory, non-programmable (ROM) or a programmable, non-erasable, read only memory (PROM) or an UV erasable, programmable, read only memory (EPROM), with a storage capacity of 128, 192 or 256 Kbits, an analogue-to-digital converter and a digital-to-analogue converter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19 × 58 mm, with not more than 80 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

M 37450E8

M 37450M8M 38063M6M 38063E8M 38067M8

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*35> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a read only memory, non-programmable (ROM) with a storage capacity of 32 Kbits, a random-access memory (RAM) with a storage capacity of 1 Kbit, an 8-channel analogue-to-digital converter, two 16-bit timers each with two 16-bit registers and a serial synchronous communications interface consisting of an 8-bit serial shift register with serial data input, serial data output and serial shift clock, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18 × 53 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

COP 884CF

COP 888CF

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*36> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a read only memory, non-programmable (ROM) with a storage capacity of 32 Kbits, a random-access memory (RAM) with a storage capacity of 1,5 Kbits, a full duplex universal asynchronous receiver/transmitter (UART), 2 analogue comparators, three 16-bit timers each with two 16-bit registers, and a serial synchronous communications interface consisting of an 8-bit serial shift register with serial data input, serial data output and serial shift clock, in the form of a monolithic intergrated circuit, contained in a housing the exterior dimensions of which do not exceed 18 × 53 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

COP 888CG

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*37> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a read only memory, non-programmable (ROM) with a storage capacity of 64 Kbits, a random-access memory (RAM) with a storage capacity of 2 Kbits, a full duplex universal asynchronous receiver/transmitter (UART), 2 analogue comparators, three 16-bit timers each with two 16-bit registers, and a serial synchronous communications interface consisting of an 8-bit serial shift register with serial data input, serial data output and serial shift clock, in the form of a monolithic intergrated circuit, contained in a housing the exterior dimensions of which do not exceed 18 × 53 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

COP 888EG

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*38> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, comprising a read only memory, non-programmable (ROM) with a storage capacity of 32 Kbits, a random-access memory (RAM) with a storage capacity of 1 Kbit, a 16-bit timer with a 16-bit register, and a serial synchronous communication interface consisting of an 8-bit serial shift register with serial data input, serial data output and serial shift clock, and in the form of a monolithic intergrated circuit, contained in a housing the exterior dimensions of which do not exceed 18 × 53 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

COP 880C

COP 881C

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*40> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 8 bits, providing communication and control functions in local operating networks (LON), comprising three 8-bit central processing units (CPUs), a static random-access memory (S-RAM) with a storage capacity not exceeding 16 Kbits and an electrically erasable, programmable, read only memory (E2PROM) with a storage capacity of 4 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 21 mm, with not more than 64 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MC 143120

MC 143150

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 71> ID="2">*41> ID="3">Microcontroller or microcomputer of C-MOS-technology, with a processing capacity of 8 bits, comprising a read only memory, non-programmable (ROM) with a storage capacity of 8 or 16 Kbits, a random-access memory (RAM) with a storage capacity of 512 bits or 1 Kbit and a synchronous serial communications interface circuit consisting of an 8-bit serial shift register with a serial data input, a serial data output and a serial shift clock, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 38 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

COP 820

COP 840

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 73> ID="2">*03> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 16 bits, having the function of charge control of nickel-cadmium batteries, comprising a read only memory, non-programmable (ROM) with a storage capacity of 42 000 bits, a read only memory, non-programmable (ROM) with a storage capacity of 1 Kbit, a random-access memory (RAM) with a storage capacity of 1 Kbit and a 10-bit analogue-to-digital converter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8 × 20 mm, with not more than 16 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

ICS 1700

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 73> ID="2">*05> ID="3">Microcontroller or microcomputer with a processing capacity of 16 bits, comprising a read only memory, non-programmable (ROM) or a programmable, non-erasable, read only memory (PROM) or a UV erasable, programmable, read only memory (EPROM) with a storage capacity not exceeding 256 Kbits, a random-access memory (RAM) with a storage capacity not exceeding 12 Kbits, an analogue-to-digital converter with sample/hold, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 40 × 40 mm, with not more than 84 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

8396

8397879683C19683C19887C196

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 73> ID="2">*08> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 16 bits, comprising a read only memory, non-programmable (ROM) or a programmable, non-erasable, read only memory (PROM) or a UV erasable, programmable, read only memory (EPROM) with a storage capacity of 128, 192, 256 or 384 Kbits, a random-access memory (RAM) with a storage capacity of 4, 8 or 16 Kbits and an 8-bit analogue-to-digital converter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18 × 58 mm, with not more than 80 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

M 37702 E2

M 37702 E4

M 37702 M2

M 37702 M3B

M 37702 M4

M 37702 M6L

M 37702 MDB

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 74> ID="2">*02> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 32 bits, comprising three 16-bit data buses, a 16 × 16 bits multiplier with 32 bits results, 2 read only memories, non-programmable (ROMs) with a total storage capacity of 104 or 136 Kbits and random-access memories (RAMs) with a total storage capacity of 5, 8 or 10 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 40 × 64 mm, with not more than 160 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

ST 18930

ST 18940ST 18942

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 74> ID="2">*03> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 24 bits, capable of 2-channel digital audio signal processing, providing reverberation and equaliser functions, comprising a read only memory, non-programmable (ROM) with a storage capacity of 192 bits, a random-access memory (RAM) with a storage capacity of 344 bits, an instruction register, an accumulator register, 2 multiplication registers, 2 sequence registers, two 16-bit input registers, two 16-bit output registers and 2 filters, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 15 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CXD 2701Q

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 74> ID="2">*11> ID="3">Microcontroller or microcomputer of C-MOS technology, with a processing capacity of 32 bits, comprising one or more random-access memories (RAMs) with a total storage capacity of 64 Kbits and a read only memory, non-programmable (ROM) with a storage capacity not exceeding 128 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 69 × 74 mm, with not more than 325 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

320 C 30

320 C 40DSP 3207

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 77> ID="2">*02> ID="3">Gate array of C-MOS technology, comprising at least 234 916 gates and at least 416 in-/outputs, in the form of a monolithic integrated circuit, either contained in a housing the exterior dimensions of which do not exceed 62 × 62 mm or fixed on a plastic support, with not more than 512 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

LCA 100235

TGC 1245

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 77> ID="2">*04> ID="3">Control and interface circuit based on gate arrays of C-MOS technology, capable of controlling and interfacing between an inkjet printer, a dynamic random-access read/write memory (D-RAM) and microprocessors, providing data organisation and transfer to the printhead, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 36 × 36 mm, with not more than 184 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

1TY6-0001

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 80> ID="2">*06> ID="3">Programmable logic device, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 85 × 124 mm, with or wihout a quartz window on the upper surface, with not more than 300 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

16 L8-W

16 P 8

16 R4-W

16 R6-W

16 R8-W

16 RP 4

22 V10-D

22 V10-W

22 VP10

A 1010

A 1020

A 1225

A 1240

A 1280

A 14100

A 1425

A 1440

A 1460

ATT 3090

C 16 L 8

C 16 R 4

C 16 R 6

C 16 R 8

C 20 G 10

C 22 V 10

CY7B326

CY7B333

CY7B336

CY7B337

CY7B338

CY7B339

CY7C330

CY7C331

CY7C332

CY7C335

CY7C342

CY7C343

CY7C344

CY7C345

CY7C361

CY7C371

CY7C372

CY7C373

CY7C374

CY7C375

CY7C381

CY7C382

CY7C383

CY7C384

EP 600

EP 610

EP 630

EP 910

EP 1800

EP 1810

EP 1830

EPM 5032

EPM 5064

EPM 5128

EPM 5130

EPM 5192

EPM 7032

EPM 7096

EPM 7128

EPM 7160

EPM 7192

EPM 7256

EPM 7320

EPM 7384

EPM 7512

EPM 7768

EPM 71024

TPC 1225

TPC 1240

TPC 1280

XC 2018

XC 2064

XC 3020

XC 3030

XC 3042

XC 3064

XC 3090

XC 4002

XC 4003

XC 4004

XC 4005

XC 4006

XC 4008

XC 4010

XC 4013

XC 4016

XC 4020

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*04> ID="3">Controller of a local area network (LAN), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 63 × 63 mm, with not more than 132 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

82586

82588

82590

82592

Am 79C960

AM 7990

COM 9026

DP 8390

DP 83261

DP 83932

MB 86950

WD 80 C 24

WD 83 C 503

WD 83 C 510

WD 83 C 603

WD 83 C 690

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*06> ID="3">Bus controller of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 41 × 41 mm, with not more than 240 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

82308

82309

82355

82358

82 C 88

82 C 101

82 C 103

82 C 211

82 C 288

82 C 301

82 C 320

82 C 362

82 C 461

82 C 493

CA 91C014

GC 181

HT 216

L1A 4601

MSM 6307

R 4220

R 4230

TACT 83443

VAC 068

VIC 068

VIC 64

VL 82 C 331

VY 86 C 410

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*09> ID="3">Disc storage unit controller, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31 × 62 mm, with not more than 144 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

1454-001

8980

61156-001

61157-001

ADS 10C00

AIC 010

AIC 100

AIC 610 L

AIC 6190

AIC 65 C 10 B

CL SH250

CL SH260

CL SH265

CL SH350

CL SH360

CL SH361

CL SH362

FE 2100

G 70360-33

HDC 9224

HDC 9234

L 1 A 0519

MB 89311

OMTI 505

OTI 018

OTI 033

PD 7261

PD 7262

WD 1010

WD 2010

WD 5010

WD 5011

WD 16C92

WD 42C22

WD 76C20

Z 86 C 99

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*10> ID="3">Video controller, with at least one of the following functions:

- a) cathode-ray tube controlling,

- b) liquid crystal display (LCD) controlling,

- c) display controlling or character generation for liquid crystal displays (LCDs),

- d) graphics controlling,

- e) colour selection controlling,

in the form of a monolithic integrated circuit, either contained in a housing the exterior dimensions of which do not exceed 36 × 62 mm or fixed on a plastic support, with not more than 231 connections:

- an identification marking consisting of or including one of the following combinations of figures and letters:

a) 82 C 434

a) 82 C 453

a) 82 C 801

a) 86 C 805

a) 86 C 911

a) 86 C 928

a) AM 8052

a) ATI 68800

a) CRT 9007

a) CRT 97 C 11

a) ET 4000

a) M 50452

a) MB 89321

a) MB 89322

a) TVGA 8900C

a) V 6363

a) VY 86 C 310

a) WD 90 C 10

a) WD 90 C 11

a) WD 90 C 30

a) WD 90 C 31

a) WD 90 C 33

b) 82 C 425

b) CL-GD6410

b) COP 472

b) HD 44100

b) HD 44780

b) HD 66100

b) HD 61104T

b) HD 61105T

b) HD 66106T

b) HD 66107T

b) LC 7582

b) MSM 5259

b) MSM 5298

b) MSM 5299

b) MSM 5839

b) SED 1600

b) SED 1610

b) TMS 3491

b) TMS 3492

b) TMS 57202

b) TMS 57206

b) TMS 57207

b) TMS 57210

b) TMS 57212

b) TMS 57213

b) V 6355-DJ

c) HD 61830

c) LH 5821

d) 82 C 431

d) 82 C 435

d) 82 C 441

d) 82 C 451

d) 82 C 452

d) 84 C 451

d) AVGA1

d) CL-GD5410

d) HT 208

d) HT 209

d) NCR 77C22

d) OTI 067

d) PEGA

d) PVGA

d) WD 90 C 00

e) 82 C 433

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*11> ID="3">Direct memory access (DMA) controller, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 38 × 83 mm, with not more than 160 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

82307

82357

82380

82 C 223

GC 183

HD 68450

L1A 4599

MC 68440

MC 68450

VC 2730-000 1 C

WE 32104

Z 8516

Z 9516

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*12> ID="3">Control and/or management circuit for memories (including buffers), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 53 × 82 mm, with not more than 369 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

0404 1872

1RJ3-0001

1TU9-0301

390 Z 55

68451

82359

82385

82395

82485

82495 XP

82 C 08

82 C 102

82 C 222

82 C 283

82 C 302

82 C 325

82 C 392

A 38202

CY7C604

CY7C605

GC 113

HT 113

HT 322

HT 342

MC 68851

NS 32082

NS 32382

T 9490

THCT 4502

TX 32082 W

VL 4502

WD 1015

WD 11 C 00-22

WD 12 C 00-22

WD 83 C 580

WD 83 C 583

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*13> ID="3">Serial and/or parallel communication controller, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31 × 62 mm, with not more than 100 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

82 C 605

82 C 606

82 C 607

CL-CD180

MC 2652

MC 68652

PD 72001

SCN 2652

SCN 2661

SCN 68562

SCN 68652

SCN 68661

WD 76C30

Z 80 C 30

Z 85 C 30

Z 85 C 35

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*22> ID="3">Digital line interface control circuit of C-MOS technology, capable of controlling the data flow between a system interface circuit, a subscriber line interface circuit (SLIC) and a microprocessor interface circuit, comprising 2 multiplexers, 4 transmit/receive buffers with serial data ports, a data protocol control circuit, interrupt registers, 256 7-bit registers and a random-access memory (RAM) with a storage capacity of 128 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 53 mm, with not more than 40 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TP 3120

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*26> ID="3">Control circuit of C-MOS technology, providing memory control, comprising an equiliser, a memory interface circuit, a multiplexer, a decoder, a bus control circuit and direct memory access (DMA) control circuits in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29 × 29 mm, with not more than 208 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

1TX6-0301

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*28> ID="3">Control circuit of C-MOS technology, operating at 12 MHz, comprising a programmable interval timer, a clockgenerator, two direct memory access controllers and a memory mapper, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30 × 30 mm, with not more than 84 connections and bearing:

- an identification marking consisting of or including the following combination of figures:

82231

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*29> ID="3">Circuit with a multimaster bus, of C-MOS technology, for controlling a local channel in 16 bits automatic data-processing machines, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30 × 30 mm, with not more than 132 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures:

82303

8230482306

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*30> ID="3">Control circuit of C-MOS technology, for controlling the sequence of 4-bit addresses for execution of instructions in a microprogramme memory, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14 × 38 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CY2909

CY2911CY7C909CY7C911

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*32> ID="3">Remote control circuit of C-MOS technology, capable of generating 2 048 different commands and controlling 32 systems, comprising a keyboard encoder, a keyboard decoder, a parallel to serial converter, a divider, a reset generator and an oscillator, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 36 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

SAA 3010

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*33> ID="3">Eight-channel control circuit of C-MOS technology, for maintaining a constant electromagnetic traction force with incorporated diodes and a storage capacity of 8 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 9 × 28 mm, with not more than 22 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

UCN 5801

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*34> ID="3">Monolithic integrated circuit with at least 16 analogue switching elements, of C-MOS technology, for controlling signals of 20 Hz or more but not exceeding 20 000 Hz, capable of dealing with signals up to 3 V with a distortion of not more than 0,05 % over the whole frequency range at a voltage of 1 V, contained in a housing the exterior dimensions of which do not exceed 16 × 40 mm, with not more than 42 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

TC 9164 N

TC 9177 PTC 9184 P

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*35> ID="3">Control circuit of C-MOS technology, for the management of asynchronous cycles of a 32-bit central processing unit (CPU), of a direct memory access (DMA) circuit and of a multimaster bus, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31 × 31 mm, with not more than 100 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters :

82 C 321

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*36> ID="3">Control circuit or control and management circuit, comprising 2 direct memory access (DMA) controllers and 2 interrupt controllers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 39 × 39 mm, with not more than 208 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

82360SL

82C206

82C316

GC 101 SX

HT 101 SX

VL 82 C 480

VL 82 C 486

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*39> ID="3">DC motor control circuit, with at least one of the following caracteristics:

- a) of BiMOS technology,

- b) of C-MOS technology, comprising a circuit to monitor power supply, a circuit to store and decode addresses and to multiplex data, an 8-bit digital-to-analogue converter and 5 amplifiers,

- c) of N-MOS (including H-MOS) technology, comprising a digital 16-bit filter,

in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 37 mm, with not more than 64 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

a) 9990CS

b) GC 27b) GC 45c) LM 629

- other identification markings relating to devices complying with the abovementioned description

> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*40> ID="3">Control circuit of C-MOS technology, for controlling and interfacing signals between a central processing unit (CPU), memory and input/output interfaces, comprising circuits for refreshing dynamic random-access memories (DRAMs), for decoding of addresses, for generating clock signals and monitoring data transfer interrupt signals, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30 × 30 mm, with not more than 84 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

344 S 0602

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*52> ID="3">Control circuit of C-MOS technology, capable of processing read-signals and of controlling the motor of a compact-disc player, comprising a central processing unit (CPU) interface, an error detection/correction circuit, a read-signal demodulator, a phase locked loop (PLL) circuit and a constant-linear-velocity (CLV) controller, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 21 mm, with not more than 80 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXD 1125

CXD 1130CXD 1135CXD 1167MN 66271

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*53> ID="3">Control circuit of C-MOS technology, for a microcontroller, a microcomputer or a microprocessor with a processing capacity of 16 or 32 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31 × 31 mm, with not more than 208 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

82C311

TACT 82S411

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*56> ID="3">Control circuit of C-MOS technology, capable of controlling video-signals of a charge-coupled (CCD) image sensor, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13 × 13 mm, with not more than 80 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXD 2103

CXD 2133

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*62> ID="3">Input-output circuit of N-MOS (including H-MOS) technology for data control, equipped with a timing control with a static random-access memory (S-RAM) with a storage capacity of 128 × 8 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16 × 54 mm, with not more than 40 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

6532

CO 10750

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*63> ID="3">Control circuit, of N-MOS (including H-MOS) technology, for data/address flows from the central processing unit (CPU), inputs/outputs and the main memory, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 36 × 36 mm, with not more than 132 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CIM 1456

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*68> ID="3">Error detection and correction circuit of N-MOS (including H-MOS) technology, capable of detecting and correcting single bit errors and detecting all double bit errors, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30 × 30 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including the following combination of figures:

8206

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*71> ID="3">Control circuit of C-MOS technology, for a microprogramme, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 54 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CY 2910

CY 7C 910

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*74> ID="3">Control circuit of C-MOS technology, for the control of constant power supply of 60 V/500 mA, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13 × 13 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

UCN 5816

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*75> ID="3">Control circuit, of C-MOS technology, for monitoring the voltage of random-access memories (RAMs) in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 54 mm, with not more than 16 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

BQ 2201

BQ 2202BQ 2204BQ 2502BQ 2503DS 1210

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*81> ID="3">Controller for servo-devices of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 54 mm, with not more than 40 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

KM 3702

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*82> ID="3">Timing control unit (TCU) with two-phase cycle for central processing unit (CPU) and memory management unit (MMU), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16 × 33 mm, with not more than 40 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

NS 32201

NS 32 C 201

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 82> ID="2">*89> ID="3">Line decoder/driver of C-MOS technology, providing 28 bipolar outputs with a breakdown voltage of 30 V and a continuous current of 500 mA, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 17 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

UCN 5817

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*08> ID="3">Bus interface circuit, whether or not with bus control functions, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 34 × 63 mm, with not more than 208 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

53 C 700

53 C 710

53 C 720

82335

82351

82352

82353

82365SL

82C100

82C300

82C836

89C100

89C105

AIC 6250

AIC 7770

CL PD6710

CL PD6720

CY7C964

ESP 216

ESP 226

FAS 216

FAS 226

FAS 236

FE 3030

GC 132

GC 133

HS 3282

L 64853A

NCR 5380

NCR 5381

NCR 53 C 80

NCR 53 C 90

PBI

TACT 84544

TMS 38030

WD 33 C 92

WD 33 C 93

WD 76 C 10

Z 86017

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*09> ID="3">Interface circuit or interface circuit with control functions, for a fibre-optic or twisted-pair-cable local area network (LAN), capable of interfacing between a media access controller and a local area network (LAN) or a central processing unit (CPU), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 38 × 38 mm, with not more than 175 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

DP 8025

DP 83251

DP 83255

DP 83265

DP 83902

DP 83905

SMC 83C790

T 7213

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*10> ID="3">Cathode-ray tube control and interface circuit, capable of interfacing between a graphic microprocessor and dynamic random-access memories (D-RAMs), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30 × 30 mm, with not more than 132 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

TMS 34096

TMS 34098

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*11> ID="3">Control and interface circuit of C-MOS technology, comprising a memory controller, a peripheral controller, a central processing unit (CPU) interface circuit, a numeric processor unit (NPU) interface circuit, a clock generation circuit, a timer and a parity-check circuit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 33 × 33 mm, with not more than 208 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

HT 15

HT 18HT 21HT 22

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*12> ID="3">Interface circuit of C-MOS technology, for at least one encoder, capable of identifying and measuring direction and displacement via signals of external sensors, comprising at least 3 counters, at least one latch of 16 or 24 bits, at least one multiplexer, at least one 8-bit parallel data buffer, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25 × 37 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

THCT 2000

THCT 12016THCT 12024THCT 12316

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*13> ID="3">Data interface and control circuit of C-MOS technology, providing transmission and reception of 1-bit, 4-bit or 8-bit data packets at a rate of 51,84 Mbits per second, comprising a receive control circuit, a transmit control circuit, a receive data formatter and a transmit data formatter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29 × 29 mm, with not more than 144 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TXC 05101

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*14> ID="3">Interface or interface and control circuit of C-MOS technology, with at least one of the following functions:

- a) for signals between a peripheral disc memory unit and a central processing unit (CPU),

- b) for controlling data communication between a system bus interface and peripheral units, comprising a system interface gate, a microprocessor gate and a direct memory access (DMA) gate,

- c) for interfacing and controlling the data sequence between an automatic data-processing machine and a disc storage unit,

- d) for read/write data between a digital-audio-tape storage unit and a microprocessor,

in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 53 × 62 mm, with not more than 208 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

a) AIC 560 L

a) DP 8466

a) OMTI 5080 (OMTI 20508)

a) OMTI 5090 (OMTI 20509)

a) WD 11 C 00-17

a) WD 14 C 00-17

b) 1TU1-0301

b) 1TU2-0301

b) 1TV3-0301

b) 1TV3-0302

b) 1TV4-0301

b) 1TV4-0302

c) 32C260

c) AIC 6060

d) 1XK2-0301

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84

ex 8542 11 95> ID="2">*23

*56> ID="3">Serial interface, capable of implementing the data stream encoding, decoding and associated control functions for a local area network (LAN), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16 × 33 mm, with not more than 24 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

8002

8023

82501

82 C 501

AM 7991

COM 9032

COM 91 C 32

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*24> ID="3">Interface circuit for a text data decoder of C-MOS technology, capable of data-slicing, clock regeneration and synchronisation separation, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8 × 25 mm, with not more than 20 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CF 72303

CF 72306

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*26> ID="3">Flow meter interface of BiMOS technology, comprising 16 amplifiers, 3 digital-to-analogue converters, an analogue-to-digital converter, filters, a sample and hold circuit, an oscillator, a phase locked loop (PLL) circuit and a serial interface circuit for a microprocessor, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25 × 25 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

AD75027

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*27> ID="3">Interface circuit of C-MOS technology, for a keyboard with a capacitive matrix, capable of matrix scanning and detection, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14 × 52 mm, with not more than 40 connections and bearing:

- an identification marking consisting of or including the following combination of figures:

22-00958-000

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*29> ID="3">Interface circuit of C-MOS technology, capable of interfacing between a graphic microprocessor, dynamic random-access memories (D-RAMs) and a colour palette register, generating local memory address and control signals for the graphic microprocessor, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30 × 30 mm, with not more than 132 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TMS 34092

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*34> ID="3">Control and interface circuit of C-MOS technology, capable of receiving, processing and transmitting subscriber data in a digital network, comprising a line interface unit, a multiplexer, a data link controller, a microprocessor interface and an oscillator, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18 × 54 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

AM 79C30A

AM 79C32AQMV 453

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*36> ID="3">Control circuit of C-MOS technology, for a floppy disc-unit and data transfer rate, for precompensation of write signals, for data separation, for clock-signal generation and for interfacing a central processing unit (CPU), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26 × 62 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

82077

DP 8473WD 37C65WD 57C65

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*40> ID="3">Control and interface circuit for central processing unit (CPU) of C-MOS technology, comprising a control unit for the refreshment of memories, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31 × 31 mm, with not more than 100 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

FE 3010

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*44> ID="3">Control and interface circuit of C-MOS technology, operating at 12 MHz, comprising a clock generator, a bus controller for a microprocessor, a timer, two programmable interrupt controllers and an interface for a numeric coprocessor, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30 × 30 mm, with not more than 84 connections and bearing:

- an identification marking consisting of or including the following combination of figures:

82230

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*45> ID="3">Control and interface circuit of C-MOS technology, comprising 2 interrupt controllers, three 16-bit programmable timer-counters, a real time clock and a numeric microprocessor interface, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 28 × 28 mm, with not more than 120 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TACT 82303 PB

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*46> ID="3">Control and interface circuit of C-MOS technology, comprising 48 mA drivers, registers, an 18-bit direct memory access (DMA) interface, an 8-bit microprocessor bus and a parity generator and checker, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31 × 31 mm, with not more than 100 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

NCR 53C94

NCR 53C95NCR 53C96

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*47> ID="3">Interface and control circuit of C-MOS technology, comprising 2 universal asynchronous receiver/transmitters (UARTs), a parallel-data port, a hard-disc interface and a floppy-disc controller, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29 × 29 mm, with not more than 160 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

82C711

TACT 88511

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*48> ID="3">Interface and control circuit of C-MOS technology, programmable for interfacing signals between video-graphic-array (VGA) controllers and cathode-ray tube (CRT) displays, liquid crystal displays (LCDs), light-emitting-diode (LEDs) displays or plasma-displays, capable of simultaneously controlling a CRT-display and a LCD display, comprising a digital-to-analogue video-converter with random-access memory (RAMDAC), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 21 mm, with not more than 100 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CL-GD6340

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*49> ID="3">Repeater interface and control circuit of C-MOS technology, comprising 7 or 12 transmission/reception interface ports, an attachment-unit interface (AUI) port, a phase locked loop (PLL) decoder, a 32-bit buffer and a bus-interface for communication between repeater interface controllers (RICs), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 45 × 45 mm, with not more than 160 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

DP 83950

DP 83955

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 84> ID="2">*50> ID="3">Interface circuit of C-MOS technology, for interfacing data between a 32-bit bus and input/output-registers and/or interface circuits, providing direct memory access (DMA) control, comprising a FIFO (first in, first out) read/write memory with a storage capacity of 256 bits, a data-latch, an address-latch and 32-bit registers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 37 × 37 mm, with not more than 132 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

1XB9-0401

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*01> ID="3">8-bit data-desynchroniser/synchroniser of C-MOS technology, capable of transmitting and receiving 2 asynchronous signals at a rate of 2 Mbits per second, comprising a microprocessor control circuit and a 4-buses interface circuit operating at a rate of 19,44 megabytes per second and a phase-locked loop (PLL) circuit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30 × 30 mm, with not more than 84 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TXC 04002

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*02> ID="3">Universal synchronous receiver/transmitter of C-MOS technology (C-MOS USRT), capable of full duplex digital voice and/or data transfer with a speed of 80 Kbits/s or more over a distance of 2 km or a speed of 160 Kbits/s or less over a distance of 1 km, comprising a modulator and data buffers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 33 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MC 145421

MC 145422

MC 145425

MC 145426

TP 3401

TP 3402

TP 3403

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*05> ID="3">Data segmentation or reassembly circuit of C-MOS technology, providing fragmentation of 16 382 packets of 8- or 16-bit words into cells or providing reassembly of these cells in 16 382 packets of 8- or 16-bit words, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29 × 29 mm, with not more than 208 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

TXC 05501

TXC 05601or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*06> ID="3">8-bit identity comparator of C-MOS technology, with a propagation delay of not more than 7,2 ns, capable of bit for bit comparison of 2 words of not more than 8 bits each, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10 × 27 mm, with not more than 20 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

74FCT521

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*09> ID="3">8-, 16- or 18-bit register of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 27 mm, with not more than 56 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

74FCT162374

74FCT162823BT

74FCT162823CT

74FCT16374

74FCT16823BT

74FCT16823CT

74FCT374

74FCT534

74FCT574

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*13> ID="3">Encoder/decoder with filter of C-MOS technology, for frequencies of 600 Hz or more but not exceeding 4 000 Hz, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12 × 31 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

QMV 112

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*14> ID="3">16- or 20-bit flip-flop of the D-type of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11 × 20 mm, with not more than 56 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

74 AC 16821

74 ACT 16374

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*15> ID="3">Dual-tone multi-frequency (DTMF) receiver of C-MOS technology, capable of decoding DTMF signals to 4-bit binary data, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12 × 30 mm, with not more than 22 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

M-957

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*17> ID="3">Clock recovery circuit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12 × 12 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

DP 83231

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*18> ID="3">Digital-to-analogue and analogue-to-digital converter of BiMOS technology, comprising sample and hold circuits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25 × 25 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including the following combination of figures:

21-26500

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*19> ID="3">Programmable overhead terminator of C-MOS technology, providing 8-bit data transmission/reception and line pointer generation using an external clock, comprising a random-access memory (RAM), a serial in-/output port, a microprocessor interface circuit, a multiplexer and a demultiplexer, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29 × 29 mm, with not more than 160 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TXC 03003

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*20> ID="3">Quadruple encoder/decoder with pulse-code-modulation filters of C-MOS technology, comprising amplifiers for sidetone balance, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 18 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

QMV 365

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*24> ID="3">Digital signal synthesiser of C-MOS technology, with at least one of the following characteristics:

- a) comprising random-access memories (RAMs) with a total storage capacity of 16 Kbits, with a sampling rate of 22,257 kHz and 44,1 kHz and 2 output channels,

- b) comprising 32 or 48 frequency generators, a clock generator and an address generator,

in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31 × 31 mm, with not more than 84 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

a) 344 S 0053

b) VC 2375b) VC 5395

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*25> ID="3">Circuit for the recording and reproduction of speech of C-MOS technology, working at a speed of 8 Kbits/sec or more, with at least one of the following caracteristics:

- a) comprising an amplifier and a 10 bit digital-to-analogue converter,

- b) comprising a memory interface circuit, an encoding/decoding circuit, a central processing unit (CPU) interface,

in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18 × 22 mm, with not more than 100 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

a) T 6668

a) TC 8830b) TC 88401

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*26> ID="3">Analogue-to-digital signal converter, containing amplifiers, digital-to-analogue and analogue-to-digital converters with a supply voltage of 12 V (±10 %) and a digital serial interface with asynchronous receiver/transmitter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18 × 18 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

AD 75002

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*28> ID="3">Transmitter/receiver of BiMOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26 × 38 mm, with not more than 100 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CY7B923

CY7B933

DS 3884

DS 3886

SN 74 BCT 2420

SN 74 BCT 2423

SN 74 BCT 2424

SN 74 BCT 2425

SN 75 LBC 976

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*29> ID="3">Transmitter/receiver of C-MOS technology, with at least one of the following characteristics:

- a) capable of terminating line rates of 8 448 or 34 368 bits per second,

- b) of the 8-, 16- or 32-bit bidirectional type,

- c) operating with a single power supply of +5 V and a supply current not exceeding 2 mA, comprising 2 transmitters and 2 receivers,

- d) operating with a single power supply of +5 V, comprising 4 transmitters and 5 receivers of which at least one stays active during shutdown,

- e) operating with a single power supply of +5 V, comprising at least 6 transmitters and at least 8 receivers,

- f) operating with a single power supply of +5 V and with a data transfer rate per second of 120 Kbits or more, comprising not more than 5 transmitters and not more than 5 receivers,

- g) having a supply current not exceeding 3 mA, comprising 2 driver circuits and 3 receivers,

- h) with a propagation delay not exceeding 11 ns,

- i) for signals between an encoder/decoder using Manchester code (MED) or an interface unit and a twisted pair cable or a coaxial cable in a local area network (LAN),

in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20 × 53 mm, with not more than 56 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

a) TXC 02050

b) 29 C 833 A

b) 29 C 853 A

b) 74 AC 16472

b) 74 AC 16646

b) 74 AC 16657

b) 74 ACT 16245

b) 74 ACT 16470

b) 74 ACT 16863

b) 74 FCT 162500

b) 74 FCT 162501

b) 74 FCT 162543

b) 74 FCT 162646

b) 74 FCT 162652

b) 74 FCT 162952

b) 74 FCT 16500

b) 74 FCT 16501

b) 74 FCT 16543

b) 74 FCT 16646b) 74 FCT 16652

b) 74 FCT 16952

b) 74 FCT 245

b) 74 FCT 645

c) MAX 220

d) MAX 213

d) MAX 223

e) MAX 244

e) MAX 245

e) MAX 246

e) MAX 247

e) MAX 248

e) MAX 249

f) MAX 200

f) MAX 201

f) MAX 202

f) MAX 203

f) MAX 204

f) MAX 205

f) MAX 206

f) MAX 207

f) MAX 208

f) MAX 209

f) MAX 210

f) MAX 211

g) LTC 902

h) 29 FCT 52

h) 82503

i) 83C92

i) 83C94

i) Am 79C98

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*30> ID="3">Decoder of C-MOS technology, for demodulating and demultiplexing of stereo signals, comprising an interface circuit of a digital-to-analogue converter having a output clock signal of 8,192 or 16,384 MHz, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 21 × 63 mm, with not more than 64 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CF 70088

CF 70091

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*31> ID="3">Synchronising circuit combined with a scan and signal distributor of C-MOS technology, comprising a control unit, a contact bounce elimination circuit, a 17-bit shift register and a data output formatting unit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 54 × 54 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

QMV 222

- other identification marking relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*32> ID="3">Digital-to-analogue converter, with at least one of the following characteristics:

- a) with a capacity of 7 bits,

- b) with a capacity of 8 bits, of C-MOS technology, capable of double buffering 8-bit words,

- c) quadruple converter with a capacity of 12 bits, of BiMOS technology,

- d) single or triple converter of C-MOS technology, with at least one random-access memory (RAMDAC), having one or more colour palette registers,

- e) of C-MOS technology, with a dynamic audio range of 93 dB or more,

in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 45 × 45 mm, with not more than 208 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

a) PBM 3960

b) DAC 0830

b) DAC 0831

b) DAC 0832

c) AD 664

d) 357S0010

d) 357S0011

d) 357S0012

d) ATT 20C490

d) ATT 20C491

d) ATT 20C492

d) ATT 20C493

d) ATT 20C497

d) Bt451

d) Bt458

d) Bt459

d) Bt460

d) Bt461

d) Bt462

d) Bt463

d) Bt467

d) Bt473

d) Bt475

d) TVP 3020

d) TVP 3030

d) MU 9C9760

d) SC 11482

d) SC 11483

d) SC 11484

d) SC 11485

d) SC 11487

d) SC 11489

d) SC 15025

d) SC 15026

d) TR 9C1710

e) CS 4328

e) CXD 2564

e) TMS 57010

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*33> ID="3">Analogue-to-digital converter, with at least one of the following characteristics:

- a) 8-bit parallel converter of C-MOS technology,

- b) with a capacity of 16 or 20 bits of C-MOS technology, comprising a synchronisation circuit, 2 modulators, 2 digital filters, a 4-bit digital-to-analogue converter and an amplifier,

- c) 16-, 18- or 20-bit stereo audio converter of C-MOS technology,

- d) with a capacity of 16 bits, comprising a digital filter with a passband of 45,5 kHz at 3 dB,

- e) capable of driving a liquid crystal (LCD) or light emitting diode (LED) display with not more 4 digits,

in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18 × 55 mm, with not more than 60 connections and bearing:

- an identification marking consisting of or including one the following combinations of figures and letters:

a) IDT 75C48

a) IDT 75C58

a) MP 7683

a) MP 7684

b) CS 5516

b) CS 5520

c) CS 5326

c) CS 5327

c) CS 5328

c) CS 5329

c) CS 5336

c) CS 5339

c) CS 5349

d) DSP 56ADC16

e) HI 7131

e) HI 7133

e) ICL 7106

e) ICL 7107

e) ICL 7116

e) ICL 7117

e) ICL 7126

e) ICL 7136

e) ICL 7137

e) MAX 130

e) MAX 131

e) MAX 133

e) MAX 138

e) MAX 139

e) MAX 140

e) MAX 136

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*34> ID="3">Dual or octal universal asynchronous receiver/transmitter (Dual or octal UART), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 32 × 53 mm, with not more than 100 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

1TQ1-0202

2681PC 87310SCC 2698

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*35> ID="3">Latch, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19 × 33 mm, with not more than 56 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

74FCT162373

74FCT162841

74FCT16373

74FCT16841

74FCT373

74FCT533

74FCT573

74FCT841

74FCT843

74FCT844

74FCT845

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*38> ID="3">Clock/calendar circuit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 33 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

58274

MC 146818

MCCS 146818

MM 58167

MM 58174 A

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*39> ID="3">Clock generator, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 38 mm, with not more than 64 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

82 C 402

AV 9129

Bt 438

Bt 439

CXD 1035

CXD 1252

CXD 1255

CY7B991

CY7B992

DP 8531

DP 8532

DP 83241

ICD 2023

ICD 2027

ICD 2028

ICS 1394

ICS 2494

ICS 90C64

LZ 93F31

LZ 93F33

LZ 93N61

PCLK 1

PCLK 2

SC 11410

SC 11411

SC 11412

TCK 9002

WD 90 C 61

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*40> ID="3">Data-buffer or data/address-buffer circuit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30 × 30 mm, with not more than 128 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

FB 2020

GC 102HT 102VL 82 C 332

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*41> ID="3">Buffer and line driver of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11 × 27 mm, with not more than 56 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

74 AC 16240

74 AC 16825

74 AC 16827

74 ACT 16244

74 FCT 240

74 FCT 241

74 FCT 244

74 FCT 540

74 FCT 541

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*42> ID="3">Arithmetic-logic unit (ALU) of C-MOS technology, with a capacity of 4 or 16 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29 × 83 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CY2901

CY7C9101

CY7C9115

CY7C9116

CY7C9117

CY7C901

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*43> ID="3">Circuit of C-MOS technology, with audio output and with or without hour-count, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 33 mm, with not more than 24 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

7910

SVM 5530or

- other identification markings relating to devices complying with the abovementioned description

These devices are for use in the manufacture of goods falling within Chapter 91(24) ()> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*44> ID="3">Data or image compression/decompression circuit of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 46 × 46 mm, with not more than 188 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

1XH4-0301

1XK6-0301

1XY9-0001

74 ACT 6340

CL 450

CL 550

CL 950

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*46> ID="3">Logic circuit of C-MOS technology, having only one of the following functions:

- single or dual AND,

- single or triple INVERTER,

- single or dual NAND,

- single or dual NOR,

- exclusive, single or dual OR,

- single or dual bilateral switch,

- Schmitt-trigger,

- 2-channel multiplexer,

in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 5 × 6 mm, with not more than 8 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

TC 4S01F

TC 4S11F

TC 4S30F

TC 4S66F

TC 4S69F

TC 4S71F

TC 4S81F

TC 4S584F

TC 4SU11F

TC 4SU69F

TC 4W53F

TC 4W66F

TC 7S00F

TC 7S02F

TC 7S04F

TC 7S08F

TC 7S32F

TC 7SU04F

TC 7W00F

TC 7W02F

TC 7W04F

TC 7W08F

TC 7W32F

TC 7WU04F

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*47> ID="3">Circuit for data transfer between a microprocessor and memory cards of a thickness of 3 mm or more, of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 28 × 28 mm, with not more than 120 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MB 86301

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*49> ID="3">Frequency synthesiser of BiMOS technology, capable of synchronising and dividing of frequencies, comprising 1 or 2 phase-locked loop circuits and 1 or 2 prescalers with an operating frequency of 10 MHz or more but not exceeding 2,5 GHz, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 7 × 25 mm, with not more than 20 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MB 1501

MB 1509MB 1518

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*51> ID="3">Audio decoder of C-MOS technology, capable of decoding and decompressing audio signals at a rate per second not exceeding 15 Mbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 28 × 28 mm, with not more than 120 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

74 ACT 6350

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*52> ID="3">Circuit of C-MOS technology, providing synchronisation and discrimination of read-signals and generation of write signals, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29 × 29 mm, with not more than 136 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

HG 22SS013601

- other identification marking relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*53> ID="3">Signal generator of C-MOS technology, providing synchronous pulse generation for a charged coupled (CCD) image sensor, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11 × 19 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXD 1030

CXD 1217LZ 93B53LZ 93N43

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*54> ID="3">Modulator/demodulator of C-MOS technology (C-MOS-Modem), only for half duplex transfer of image telegraphy (facsimile) at a rate of 300, 2 400, 4 800, 7 200 or 9 600 bits per second, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 21 mm, with not more than 80 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TC 35128

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*55> ID="3">Generator of C-MOS technology, for a user-definable cursor, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8 × 33 mm, with not more than 24 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

Bt431

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*57> ID="3">Programmable asynchronous communication element circuit of C-MOS technology, for the asynchronous transmission and reception of data, comprising a FIFO (first in, first out) read/write memory with a storage capacity of 128 bits and at least one serial input/output channel and a bi-directional parallel channel, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26 × 26 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

16C551

16C552

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*58> ID="3">Address comparator of C-MOS technology, comprising one or more static random-access memories (S-RAMs), a parity generator, a parity checker and one or more comparators, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20 × 65 mm, with not more than 48 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

SN 74 ACT 2151

SN 74 ACT 2152

SN 74 ACT 2153

SN 74 ACT 2154

SN 74 ACT 2156

SN 74 ACT 2157

SN 74 ACT 2158

SN 74 ACT 2159

SN 74 ACT 2160

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*59> ID="3">Signal processing circuit of C-MOS technology, capable of processing video-signals from a charge-coupled (CCD) image sensor, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 21 mm, with not more than 100 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXA 1810

CXD 2100CXD 2150

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*61> ID="3">Computing unit without an internal programme sequencer for the multiplication or processing of fixed and floating point numbers, of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 42 × 42 mm, with not more than 144 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

ADSP 3210

ADSP 3220

or- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86

ex 8542 11 98> ID="2">*63

*09> ID="3"> Smoke detector operating in a temperature range of -20 °C or more but not exceeding 60 °C, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 9 × 23 mm, with not more than 18 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MC 14467

MC 14468

MC 14471

MC 145010

CS 235

V 24216

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*64> ID="3">Scan and signal distributor of C-MOS technology, comprising a data and clock extraction unit, a control unit, a contact bounce elimination circuit, a current source control unit, a 17-bit shift register and a data output formatting unit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16 × 54 mm, with not more than 40 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

QMV 16

- other identification marking relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*65> ID="3">Encoder/decoder of C-MOS technology, for the conversion of data into NRZ (Non-Return-to-Zero) format or RLL (Run-Length-Limited) format, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12 × 12 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

61158

CL-SH110

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*67> ID="3">Linear phase digital filter of C-MOS technology, capable of filtering phase periods into a 24 bits serial format, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13 × 13 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CS 5322

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*68> ID="3">Modulator/demodulator of C-MOS technology (C-MOS-Modem), for full duplex data-transfer at a rate not exceeding 2 400 bits per second and for half duplex transfer of image telegraphy (facsimile) at a rate not exceeding 9 600 bits per second, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 53 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

SC 11044

SC 11046SC 11054SC 11055

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*69> ID="3">Echo and reverberation module, comprising a multiplier/accumulator, two random-access memories (RAMs) with a total storage capacity of 4 Kbits and a read only memory, non-programmable (ROM) with a storage capacity of 12 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25 × 25 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

VC5344

VC5909

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*70> ID="3">8 × 8 bit- or 16 × 16 bit-multiplier or multiplier/accumulator (MAC) of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30 × 83 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

ADSP 1008-A

CY7C510CY7C516CY7C517

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*71> ID="3">Adaptive differentiated pulse-code-modulation circuit of C-MOS technology, for encoding/decoding speech and data, having 8 independent channels with a bandwidth of 8 kHz and capable of full and half duplex data-transfer at a rate of at least 16 Kbits per second, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18 × 38 mm, with not more than 100 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

BBSP4CH

SC 11360SC 11362

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*72> ID="3">Encoder/decoder with pulse-code-modulation of N-MOS (including H-MOS) technology (N/H-MOS PCM), comprising a sample and hold circuit, a digital-to-analogue converter, a comparator, a successive approximation register and a logic function to interface to a full duplex PCM link, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11 × 29 mm, with not more than 22 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

2911 A-1

- other identification markings relating to devices complying with the abovementioned description> ID="4">7"> ID="1">ex 8542 11 86> ID="2">*73> ID="3">Pulse-code-modulation transmit/receive filter of N-MOS (including H-MOS) technology (N/H-MOS PCM), for a PCM line or trunk termination, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10 × 21 mm, with not more than 16 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

D 2912 A

- other identification markings relating to devices complying with the abovementioned description> ID="4">7"> ID="1">ex 8542 11 86> ID="2">*76> ID="3">Encoder/decoder of N-MOS (including H-MOS) technology, for the conversion of data into serial or parallel signals, comprising an arithmetic logic unit (ALU) and a read only memory, non-programmable (ROM) with a storage capacity of 128 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 60 mm, with not more than 48 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

TMS 38020

TMS 38021

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*80> ID="3">Comparator circuit of C-MOS technology, capable of comparing cache-address tags, comprising a static random-access memory (S-RAM) with a storage capacity of 16 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8 × 33 mm, with not more than 24 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MCM 62350

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*81> ID="3">Digital filter of C-MOS technology, capable of quadruple or octuple over-sampling for 2 channels, comprising a read only memory, non-programmable (ROM) and a random-access memory (RAM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14 × 36 mm, with not more than 40 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TMS 57021

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*86> ID="3">Digitally controlled potentiometer of C-MOS or N-MOS (including H-MOS) technology, consisting of an array of 31 or 99 resistive elements, comprising a 5 or 7 bits counter, a 5 or 7 bits non-volatile memory and a decoder, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 7 × 11 mm, with not more than 14 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

X 9102

X 9103

X 9104

X 9311

X 9312

X 9313

X 9503

X 9C102

X 9C103

X 9C104

X 9C503

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*88> ID="3">Hall effect sensor of BiMOS technology, capable of communicating over a 2-wire bus, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 5 × 5 mm, with not more than 3 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

UGN 3055U

UGS 3055U

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86

ex 8542 11 98> ID="2">*89

*15> ID="3">Disc storage unit data separator (DDS), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 37 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

DP 8460-2

DP 8460-3

DP 8460-4

DP 8465

HDC 9226

VM 5351

VM 5352

VM 5353

WD 10 C 20

WD 10 C 21

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*90> ID="3">Read channel circuit, providing read/write and servo demodulator functions, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11 × 11 mm, with not more than 64 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

32P4730

91C020

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*91> ID="3">Subscriber line audio-processing circuit (SLAC) comprising 2 digital signal processors, an analogue-to-digital converter and a digital-to-analogue converter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 39 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

AM 7901

AM 7905

- other identification markings relating to devices complying with the abovementioned description> ID="4">7"> ID="1">ex 8542 11 86> ID="2">*92> ID="3">Decoder and sink driver, providing a output current of 500 mA at an output voltage of 35 V, with 4 inputs and 16 outputs, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13 × 19 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MC 34142

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*93> ID="3">Signal synthesiser of N-MOS (including H-MOS) technology with a frequency generator, a memory of 15 instrumental tones, a digital-to-analogue converter and a quartz oscillator, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8 × 25 mm, with not more than 18 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

YM 2413

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*95> ID="3">Phoneme speech synthesiser of C-MOS technology, with a supply current of less than 10 mA, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 39 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

78 A 263

CD 54121 N2L

CD 54122 N2L

CD 54123 N2L

CD 54147 N2L

CM 54104

CM 54145 N2L

CM 54146 N2L

CM 54166 N2L

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*96> ID="3">8-bit data-synchroniser of C-MOS technology, capable of transmitting and receiving serial or parallel data at a rate of 155,52 Mbits or 19,44 megabytes per second, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30 × 30 mm, with not more than 84 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TXC 02301

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 86> ID="2">*98> ID="3">Translator of BiMOS technology, to convert to emitter-coupled logic (ECL) levels or to transistor-transistor logic (TTL) levels, capable of bus driving of full duplex data transmission, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31 × 31 mm, with not more than 84 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CY10E383

CY101E383or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 90> ID="2">*01> ID="3">Static random-access memory of GaAs technology (GaAs S-RAM), with a storage capacity not exceeding 4 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 17 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

12G014

12G044or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 90> ID="2">*02> ID="3">Random-access memory of ECL technology (ECL-RAM) with a storage capacity not exceeding 64 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18 × 37 mm or fixed on a plastic support, with not more than 28 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures:

10422

10470

10474

10480

10484

10490

100474

100484

100490

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 95> ID="2">*02> ID="3">Programmable logic device, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 39 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or figures and letters:

16L4

16L6

16L8

16R4

16R6

16R8

20L8

20R4

20R6

20R8

22V10

82 S 100

82 S 101

93458

93459

CY10E301

CY10E302

CY100E301

CY100E302

FP 54 AS 839

FP 54 AS 840

FP 74 AS 839

FP 74 AS 840

SN 54 LS 333

SN 54 LS 334

SN 54 LS 335

SN 54 LS 336

SN 74 LS 333

SN 74 LS 334

SN 74 LS 335

SN 74 LS 336

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 95> ID="2">*14> ID="3">Translator of bipolar technology, to convert to emitter-coupled logic (ECL) levels or to transistor-transistor logic (TTL) levels, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18 × 31 mm, with not more than 124 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures or of figures and letters:

57-240245

F100124F100125MB 768

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 95> ID="2">*15> ID="3">Control and/or management circuit for memories (including buffers) of bipolar technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26 × 67 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

AM 2965

AM 2966

DP 8408

DP 8409

DP 8419

DP 8428

DP 8429

MB 1422

SN 74 S 409

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 95> ID="2">*16> ID="3">Bus interface circuit of bipolar technology, in the form of a monolithic integrated circuit, contained in a housing the external dimensions of which do not exceed 26 × 34 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

82 A 203

82 A 204

82 A 205

82 A 303

82 A 304

82 A 305

82 A 436

82 A 442

AM 29821

AM 29822

AM 29823

AM 29824

AM 29825

AM 29826

AM 29843

AM 29844

AM 29845

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 95> ID="2">*17> ID="3">Control circuit of bipolar technology, capable of controlling 2 discrete power field-effect transistor (FET) devices, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12 × 12 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including the following combination of figures:

27473

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 95> ID="2">*64> ID="3">Control circuit of bipolar technology, capable of driving a PNP power transistor, having a 5 V standby-power-regulation and a 2,5 V power output reference, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 7 × 23 mm, with not more than 16 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

7015 FB

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 98> ID="2">*18> ID="3">12-bit analogue-to-digital converter of bipolar technology, incorporating a voltage reference and clock, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18 × 55 mm, with no more than 60 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

AD 574 A

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 98> ID="2">*19> ID="3">9-bit analogue-to-digital converter of bipolar technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30 × 30 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TDC 1049

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 98> ID="2">*22> ID="3">Digitise and data-separation circuit of bipolar technology, comprising a phase-locked loop circuit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 15 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

SN 28962

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 98> ID="2">*23> ID="3">12-bit digital-to-analogue converter of bipolar technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13 × 13 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TDC 1012

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 98> ID="2">*24> ID="3">Transmitter or receiver of GaAs technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 28 × 28 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

GA 9011

GA 9012

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 98> ID="2">*25> ID="3">8-, 10-, 12- or 14-bit digital-to-analogue converter of GaAs technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 32 × 32 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

TQ 6122

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 11 98> ID="2">*26> ID="3">10-bit analogue-to-digital converter of bipolar technology, containing 4 coding systems, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8 × 8 mm, with not more than 48 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

CXA 1507

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 50> ID="2">*60> ID="3">Voltage regulator with an input voltage range of 4,75 V or more but not exceeding 60 V and a quiescent current not exceeding 10 mA, comprising a 1 A switch circuit and an oscillator with a fixed frequency of 52 kHz, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 11 × 29 mm or the diameter of which do not exceed 11 mm, with not more than 24 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

LM 1575

LM 2575

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 50> ID="2">*70> ID="3">Voltage and current regulator of bipolar technology, capable of generating 3 ouput currents of respectively 7,5 mA, 50 mA and 750 mA at an ouput voltage of 5 V (±5 %), in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8 × 21 mm, with not more than 15 connections and bearing:

- an identification marking consisting of or including the following combination of figures:

34992

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*01> ID="3">Control circuit of C-MOS technology, capable of driving 4 or 8 independent output loads each with an output current of 3 A and an output leakage current not exceeding 80 mA, comprising an overvoltage detector, a short-circuit detector and an open load detector, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 23 × 38 mm, with not more than 20 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MC 33293

PC 33298

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*02> ID="3">Control circuit of BiMOS technology, capable of driving an output load with an output current of 0,5 A and an output leakage current not exceeding 100 mA, comprising an overvoltage detector, a current limiting circuit and a thermal shutdown circuit, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 11 × 11 mm, with not more than 16 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MC 3392

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*05> ID="3">Control circuit of C-MOS technology, for monitoring the voltage of microprocessors, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8 × 12 mm, with not more than 16 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

DS 1231

DS 1232

MN 1380

MN 13801

MN 13802

MN 1381

MN 13811

MN 13812

MN 13821C

MN 13822C

MN 1382C

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*07> ID="3">Control circuit of bipolar technology, capable of driving N-MOS transistors, with a standby current not exceeding 3 mA, comprising an overvoltage shutdown circuit and a charge pump, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 7 × 11 mm, with not more than 8 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MC 33091

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 60> ID="2">*14> ID="3">Disc storage unit controller of C-MOS technology, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 14 × 20 mm, with not more than 80 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

1SP9-0003

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 70> ID="2">*10> ID="3">Interface circuit of dielectric isolation technology, for telephone sets with a line voltage not exceeding 265 V, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8 × 13 mm, with not more than 20 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

LH 1497

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 70> ID="2">*40> ID="3">Subscriber line interface circuit (SLIC) of bipolar technology, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 40 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

AM 79M576

- other identification markings relating to devices complying with the abovementioned description> ID="4">7"> ID="1">ex 8542 19 80> ID="2">*01> ID="3">Filter of C-MOS technology, with a programmable cut-off frequency of 4,5 MHz or more but not exceeding 25,2 MHz and a programmable frequency amplification not exceeding 9 dB, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 5 × 12 mm, with not more than 16 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

AD 896

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*02> ID="3">Audio recording/reproducing circuit of C-MOS technology, capable of direct analogue storage of audio data with a duration of 12, 16 or 20 seconds, comprising an electrically erasable, programmable, read only memory (E2PROM) with a storage capacity of 1 Mbit, 3 amplifiers, an automatic gain control circuit and 2 filters, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 16 × 37 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

ISD 1012A

ISD 1016AISD 1020A

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*03> ID="3">Analogue signal microprocessor of bipolar technology, providing automatic gain control, read-signal processing and generation of head-positioning signals for magnetic heads in disc storage units, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 15 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

SN 28961

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*04> ID="3">Monolithic integrated analogue circuit, for the reduction of audio noise by 14 dB, contained in a housing the exterior dimensions of which do not exceed 7 × 26 mm, with not more than 18 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

HA 12043

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*07> ID="3">AM and FM receiver of bipolar technology, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 14 × 37 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXA 1030 P

CXA 1240 P

- other identification markings relating to devices complying with the abovementioned description> ID="4">7"> ID="1">ex 8542 19 80> ID="2">*08> ID="3">Delay line of C-MOS technology, for drop-out compensation of video signals, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 7 × 10 mm, with not more than 20 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXL 1506

MSM 6965 RS

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*10> ID="3">Monolithic integrated analogue circuit of bipolar technology, for the overload protection of telephone exchanges, contained in a housing the exterior dimensions of which do not exceed 10 × 11 mm, with not more than 3 connections and bearing:

- an identification marking consisting of or including the following combination of figures:

1515

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*11> ID="3">Programmable filter of bipolar technology, with a programmable cut-off frequency of 5 MHz or more but not exceeding 15 MHz and a programmable peak frequency and bandwidth, comprising a seven-pole filter and a differentiator, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8 × 20 mm, with not more than 16 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

32F8011

32F8012

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*13> ID="3">Frequency converter of GaAs technology, for the conversion of frequencies of 10,25 GHz or more but not exceeding 12,75 GHz to frequencies of 950 MHz or more but not exceeding 2 050 MHz, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 7 × 7 mm or the diameter of which does not exceed 10 mm, with not more than 16 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

20070C

AKD 12000

AKD 12010

AKD 12011

AKD 12575

AKD 2400

AND 2001T4C

FMM 5103

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*19> ID="3">Image sensor consisting of a row of not more than 3 648 photosensitive areas and a matrix linked to shift registers, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 12 × 43 mm, with not more than 22 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

LZ 2019

PD 3573TCD 103TCD 105TCD 133

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*20> ID="3">Interline charge-coupled image sensor, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 21 × 44 mm, with not more than 22 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

ICX 018

ICX 021

ICX 022

ICX 024

ICX 038

ICX 039

PD 3732

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*27> ID="3">5-channel voltage comparator for monitoring lamp-circuits, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 10 × 28 mm, with not more than 20 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

AD 22001

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*28> ID="3">Image sensor consisting of 16 rows of not more than 992 photosensitive areas and a matrix linked to a shift register, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 12 × 28 mm, with not more than 22 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

RA 16×62

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*29> ID="3">Local telephone network of C-MOS technology, capable of tone generation and of switching, amplifying and decoding audio signals from not more than 2 external telephone lines and from not more than 12 internal telephone lines, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 26 × 26 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

SC 11390

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*30> ID="3">16-bit stereo encoder/decoder with C-MOS technology, having sample rates of 4 kHz or more but not exceeding 48 kHz, comprising a multiplexer, a digital-to-analogue converter, an analogue-to-digital converter, a mute circuit, a voltage reference circuit, a microphone-input, a loudspeaker-output and a headphone-output, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 18 × 18 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

AD 1849

CS 4215

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*31> ID="3">Audio circuit of C-MOS technology, with a dynamic range of 80 dB or more, comprising 2 digital-to-analogue converters and 2 analogue-to-digital converters, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 26 × 26 mm, with not more than 68 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

AD 1848

CS 4231CS 4248

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*33> ID="3">Video processing circuit of bipolar technology, for signals from a charge-coupled (CCD) image sensor, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 21 mm, with not more than 80 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

AN 2145FHP

CXA 1310AQ

CXA 1390

CXA 1391

CXA 1392

IR 3P69

IR 3P81A

IR 3P97

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*36> ID="3">Voice-switched speakerphone circuit of bipolar technology, capable of half duplex transmission and reception of speech, comprising attenuators, level-detectors, a dial-tone detector, an algorithm-control circuit and amplifiers, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8 × 33 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MC 33218

MC 34118

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*48> ID="3">Phase-locked loop (PLL) circuit of bipolar technology, comprising an oscillator, a frequency and/or phase detector, 4 prescalers/counters, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 12 × 12 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

SN 28967

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*49> ID="3">Video processing circuit of bipolar technology, for colour or luminance signals, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 21 mm, with not more than 64 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CXA 1207

CXA 1208or

- other identification markings relating to devices complying with the abovementioned description

These devices are for use in the manufacture of cameras of the 8 mm type(25) ()> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*50> ID="3">FM-band receiver of bipolar technology, providing FM-signal demodulation, comprising at least a mixer, an intermediate frequency (IF) amplifier, a limiter amplifier and a data slicer, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8 × 16 mm, with not more than 32 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MC 13156

MC 13158

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*51> ID="3">Audio compression/decompression circuit of bipolar technology, providing a compression and an expansion mute function, operating at a supply voltage of 3 V or more but not exceeding 7 V, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 7 × 20 mm, with not more than 16 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MC 33111

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*52> ID="3">Transmitter/receiver of BiMOS technology, capable of data transmission at a rate per second of 10 Mbits, comprising 6 transmitters and 6 receivers, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 7 × 7 mm, with not more than 48 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

MC 34058

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*53> ID="3">Converter/amplifier of bipolar technology, with an output level of 22 dBm at a frequency of 900 MHz and an input level of -6 dBm, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 5 × 11 mm, with not more than 16 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

HP 3001

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*54> ID="3">Current transmitter of bipolar technology, with an output current of 4 mA or more but not exceeding 20 mA, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8 × 20 mm, with not more than 16 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

XTR 103

XTR 104or

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*55> ID="3">Voltage-to-current converter of bipolar technology, with a selectable input voltage range and a power supply voltage of 13,5 V or more but not exceeding 40 V, comprising a current transmitter and a voltage reference circuit, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 8 × 23 mm, with not more than 16 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

XTR 110

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*56> ID="3">Voltage converter of C-MOS technology, capable of transforming an input voltage level not exceeding 5 V at an input current not exceeding 0,1 mA into an output voltage not exceeding 15 V at an ouput current not exceeding 1 mA, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 7 × 8 mm, with not more than 18 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

LR 36683N

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*57> ID="3">Frequency converter of GaAs technology, with a conversion gain of 5 dB, capable of converting an input frequency of 50 MHz or more but not exceeding 860 MHz into an output frequency of 1 220 MHz, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 5 × 10 mm, with not more than 16 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

AND 7000S3C

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*58> ID="3">Frequency converter of GaAs technology, with a conversion gain of 6 dB, capable of converting an input frequency of 1 220 MHz into an output frequency of 45 MHz, comprising an oscillator, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 5 × 10 mm, with not more than 16 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

AND 7001S3C

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*59> ID="3">Frequency converter of GeAs technology, with a typical conversion gain of 20, 26 or 50 dB, capable of converting an input frequency of 500 MHz or more but not exceeding 2,5 GHz into an output frequency of 30 MHz or more but not exceeding 500 MHz, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 15 × 15 mm, with not more than 20 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

TQ 9201

TQ 9202TQ 9203

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*60> ID="3">Analogue communication circuit, capable of data conversion and signal transfer, comprising a serial input/output port for a digital signal processor (DSP), a 16-bit analogue-to-digital converter, a 16-bit digital-to-analogue converter and a clock generator, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 17 × 37 mm, with not more than 44 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

AD 28MSP01

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*61> ID="3">FM receiver of bipolar technology, capable of operating at an input frequency rage of 200 MHz, with an FM signal demodulating function, comprising at least 2 mixers, an oscillator, a diode and a Receive Signal Strengh Indicator (RSSI), in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 14 × 37 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MC 13135

MC 13136

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 19 80> ID="2">*62> ID="3">AM or FM transmitter of bipolar technology, with AM or FM signal modulation function, comprising 3 amplifiers, a prescaler and 2 oscillators, in the form of a monolithic integrated analogue circuit, contained in a housing the exterior dimensions of which do not exceed 14 × 37 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

MC 13175

MC 13176

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 20 30> ID="2">*50> ID="3">12-bit analogue-to-digital converter of C-MOS technology, comprising a sample and hold amplifier having a dynamic performance of 1 MHz per second or more, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 21 × 34 mm, with not more than 24 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

ADS 112

ADS 117

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 20 80> ID="2">*10> ID="3">Memory module, consisting of 4 electrically erasable, programmable, read only memories (E2PROMs) with a total storage capacity of 2 Mbits or more, mounted on a multilayered ceramic substrate, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16 × 42 mm, with not more than 32 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

XM 28C020

XM 28C040XM 28C4096

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 20 80> ID="2">*30> ID="3">Voltage regulator with an imput voltage not exceeding 900 V and a fixed output voltage of 41,8 V (±0,5 V), in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19 × 29 mm, with not more than 5 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

STR 54041

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 80 00> ID="2">*02> ID="3">Unregulated DC converter, with a rated output power not exceeding 1 W at 25°C, in the form of a microassembly, contained in a housing the exterior dimensions of which do not exceed 11 × 20 mm, with not more than 5 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

CPR 5848

HPR 116HPR 405

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8542 90 00> ID="2">*10> ID="3">Integrated circuit housing device, consisting of a multilayer ceramic substrate with metallic contacts for chips, the dimensions of which do not exceed 47 × 47 mm> ID="4">0"> ID="1">ex 8548 00 00> ID="2">*91> ID="3">Clock/calendar circuit, comprising a lithium battery, a quartz oscillator and a monolithic integrated circuit of C-MOS technology comprising a static random-access memory (S-RAM), the whole contained in a housing the exterior dimensions of which do not exceed 18 × 39 mm, with not more than 28 connections and bearing:

- an identification marking consisting of or including one of the following combinations of figures and letters:

DS 1287

DS 1387

MK 48T02

MK 48T08

MK 48T12

MK 48T18

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 8548 00 00> ID="2">*93> ID="3">Memory module, comprising a printed circuit on which are mounted decoupling capacitors and 4 static random-access memories (S-RAMs) with a total storage capacity of 4 Mbits, contained in a housing the exterior dimensions of which do not exceed 15 × 50 mm, with not more than 69 connections and bearing:

- an identification marking consisting of or including the following combination of figures and letters:

HB 6612832IB-7

- other identification markings relating to devices complying with the abovementioned description> ID="4">0"> ID="1">ex 9001 20 00> ID="2">*10> ID="3">Material consisting of a polarising film, supported on one or both sides by transparent material> ID="4">0"> ID="1">ex 9001 20 00> ID="2">*20> ID="3">Polarising plastic film, consisting of a transparent protective film and a polarising membrane> ID="4">0"> ID="1">ex 9001 20 00> ID="2">*30> ID="3">Polarising lenticular plastic plate with a lenticular array pitch of 0,78 mm, a thickness not exceeding 0,99 mm and the exterior dimensions of which do not exceed 740 × 974 mm> ID="4">0"> ID="1">ex 9001 90 90> ID="2">*10> ID="3">Fresnel lens of plastic, unmounted, for use in the manufacture of products falling within subheadings 8528 10 and 9008 30(26) ()> ID="4">0"> ID="1">ex 9001 90 90> ID="2">*20> ID="3">Rear projection screen, comprising a Fresnel lens of plastic and a polarizing sheet of plastic, for use in the manufacture of products falling within subheading No 8528 10(27) ()> ID="4">0"> ID="1">ex 9001 90 90> ID="2">*30> ID="3">Lens of plastic, unmounted, having a focal length of 3,86 mm (±0,1 mm) and with a diameter not exceeding 8 mm, for use in the manufacture of compact disc players(28) ()> ID="4">0"> ID="1">ex 9002 11 00> ID="2">*50> ID="3">Lens unit, having a focal length of 75 mm or more but not exceeding 94 mm, consisting of glass or plastic lenses, with a diameter of 60 mm or more but not exceeding 180 mm> ID="4">0"> ID="1">ex 9013 80 30> ID="2">*20> ID="3">Liquid crystal display (LCD), the exterior dimensions of which are 18,5 × 52 mm or 18,5 × 61 mm or 22 × 52 mm or 22 × 63 mm or 27 × 67 mm or 55,8 × 73,7 mm or 58,2 × 98,4 mm, with not more than 368 connections, consisting of a layer of liquid crystals between 2 glass sheets or plates, with 7 or more but not exceeding 750 figures or letters, for use in the manufacture of calculators(29) ()> ID="4">0"> ID="1">ex 9017 90 00> ID="2">*10> ID="3">Thermal printer head, comprising at least 7 168 heater elements mounted on 2 or more ceramic supports, the whole contained in a housing the exterior dimensions of which exceed 21 × 39 × 639 mm> ID="4">0"> ID="1">ex 9021 30 90> ID="2">*21> ID="3">Vascular protheses, neither woven nor knitted, of which the largest opening has an internal diameter not exceeding 6 mm> ID="4">3,1"> ID="1">ex 9110 12 00> ID="2">*91> ID="3">Assembly consisting of a printed circuit on which are mounted one quartz oscillator, at least one watch circuit and, whether or not integrated, at least one capacitor, of a thickness not exceeding 5 mm, for use in the manufacture of products falling within Chapter 91(30) ()> ID="4">0"> ID="1">ex 9110 90 00

ex 9114 90 00> ID="2">*92

*91> ID="3"> Assembly consisting of a printed circuit on which is mounted a watch circuit or a watch circuit and a quartz oscillator, of a thickness not exceeding 5 mm, for use in the manufacture of products falling within Chapter 91(31) ()> ID="4">0"> ID="1">ex 9110 90 00> ID="2">*93> ID="3">Assembly consisting of a printed circuit on which is mounted at least one watch circuit, a quartz oscillator and a piezo-electric sound element, with a thickness exceeding 5 mm, for the manufacture of products falling within Chapter 91(32) ()> ID="4">0"">

(1)() Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.