Commission Regulation (EU) No 1257/2014 of 24 November 2014 amending Regulation (EC) No 2003/2003 of the European Parliament and of the Council relating to fertilisers for the purposes of adapting Annexes I and IV (Text with EEA relevance)
Commission Regulation (EU) No 1257/2014 of 24 November 2014 amending Regulation (EC) No 2003/2003 of the European Parliament and of the Council relating to fertilisers for the purposes of adapting Annexes I and IV (Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EC) No 2003/2003 of the European Parliament and of the Council of 13 October 2003 relating to fertilisers(1), and in particular Article 31(1) and (3) thereof,
Whereas:
Crude potassium salts are materials obtained from natural resources through mining. For such natural products, the minimum nutrient content requirements set out in entry 1 of Table A.3 of Annex I to Regulation (EC) No 2003/2003 were laid down in accordance with sound industrial practice. However, when the potassium grade in the ore is naturally declining, producers encounter increasing difficulties to comply with the current limits, which jeopardies the continuous supply of fertilisers obtained from crude potassium salts to professional farmers. Therefore, these limits should be slightly reduced by amending entry 1 of Table A.3 of that Annex to allow producers to continue marketing their product as ‘EC fertiliser’. This amendment takes into account that the revised, slightly lower limit values also allow for efficient fertilisation and can therefore be considered as technical progress in accordance with Article 31(3) of Regulation (EC) No 2003/2003.
3,4–dimethyl-1H-pyrazole phosphate (hereinafter ‘DMPP’) is a nitrification inhibitor that is suitable for use with common nitrogen fertilisers (solid or fluid). DMPP reduces the risks of nitrogen losses into the soil and in the atmosphere and therefore enhances nitrogen use efficiency.
The reaction mixture between N-butyl-thiophosphoric-triamide and N-propyl-thiophosphoric-triamide (hereinafter ‘NBPT/NPPT’) is a urease inhibitor. NBPT/NPPT reduces the risk of nitrogen losses in the form of ammonia emissions after the application of urea-containing fertilisers and therefore enhances the nitrogen use efficiency.
In order to make them more widely available to farmers throughout the Union, DMPP and NBPT/NPPT should be added to the lists of authorised nitrification and urease inhibitors in Annex I to Regulation (EC) No 2003/2003 in accordance with Article 31(1) of Regulation (EC) No 2003/2003.
Solid or fluid straight urea formaldehyde fertilisers as well as solid NPK, NP and NK fertilisers containing urea formaldehyde are listed as fertiliser types in Annex I to Regulation (EC) No 2003/2003. Although urea formaldehyde condensates are stable in solution and in suspension, fluid NPK, NP and NK fertilisers containing urea formaldehyde are not yet listed in Annex I to Regulation (EC) No 2003/2003 as an individual product type. As there is a growing interest in marketing fluid NPK, NP and NK fertilisers containing a certain amount of urea formaldehyde as source of nitrogen, urea formaldehyde should be allowed in the preparation of fluid NPK, NP and NK fertilisers. Six new type designations should therefore be included in Table C.2 of Annex I to that Regulation.
Further to the inclusion of DMPP and NBPT/NPPT in Annex I to Regulation (EC) No 2003/2003, analytical methods to be applied for the official control of those fertilisers should be added to Annex IV to that Regulation.
Regulation (EC) No 2003/2003 should therefore be amended accordingly.
In order to ensure that the method for the analysis of NBPT/NPPT, which is currently under validation, is published by the European Committee for Standardisation before the addition of NBPT/NPPT in Annex I to Regulation (EC) No 2003/2003 and the new analytical method for that fertiliser type in its Annex IV, the application should be deferred as regards those amendments.
The measures provided for in this Regulation are in accordance with the opinion of the Committee established by Article 32 of Regulation (EC) No 2003/2003,
HAS ADOPTED THIS REGULATION:
Article 1 Amendments
Regulation (EC) No 2003/2003 is amended as follows:
Annex I is amended in accordance with Annex I to this Regulation;
Annex IV is amended in accordance with Annex II to this Regulation.
Article 2 Entry into force
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
Annex I, point (4), and Annex II, point (2), shall apply from 1 January 2016.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 24 November 2014.
For the Commission
The President
Jean-Claude Juncker
ANNEX I
Annex I to Regulation (EC) No 2003/2003 is amended as follows:
in Table A.3, entry 1 in the table is replaced by the following:
‘1
Crude potassium salt
Product obtained from crude potassium salts
9 % K2O
Potassium expressed as water-soluble K2O
2 % MgO
Magnesium in the form of water-soluble salts, expressed as magnesium oxide
Usual trade names may be added
Water-soluble potassium oxide
Water-soluble magnesium oxide
Total sodium oxide
Chloride content must be declared’
Table C.2 is amended as follows:
entries C.2.2 to C.2.8 are replaced by the following:
Forms, solubilities and nutrient content to be declared as specified in columns 4, 5 and 6 — Particle size
Data for identification of the fertilisers — Other requirements
N
P2O5
K2O
N
P2O5
K2O
1
2
3
4
5
6
‘C.2.2
Type designation:
NPK-fertiliser solution containing urea formaldehyde
Data on method of production:
Product obtained chemically and by dissolution in water, in a form stable at atmospheric pressure, without addition of organic nutrients of animal or vegetable origin and containing urea formaldehyde
Minimum content of nutrients (percentage by weight) and other requirements:
Total 15 % (N +P2O5 +K2O)
For each of the nutrients:
5 % N, at least 25 % of the declared content of total nitrogen must derive from nitrogen form (5)
3 % P2O5
3 % K2O
Maximum biuret content: (ureic N + urea formaldehyde N) × 0,026
Total nitrogen
Nitric nitrogen
Ammoniacal nitrogen
Ureic nitrogen
Nitrogen from urea formaldehyde
Water-soluble P2O5
Water-soluble K2O
Total nitrogen
If any of the forms of nitrogen (2), (3) and (4) amounts to not less than 1 % by weight, it must be declared
Nitrogen from urea formaldehyde
If the biuret content is less than 0,2 %, the words “low in biuret” may be added
Water-soluble P2O5
Water-soluble potassium oxide
The words “low in chloride” may be used only where the Cl content does not exceed 2 %
The chloride content may be declared
Forms, solubilities and nutrient content to be declared as specified in columns 4, 5 and 6 — Particle size
Data for identification of the fertilisers — Other requirements
N
P2O5
K2O
N
P2O5
K2O
1
2
3
4
5
6
C.2.3
Type designation:
NPK-fertiliser suspension
Data on method of production:
Product in liquid form, in which the nutrients are derived from substances both in suspension in the water and in solution without addition of organic nutrients of animal or vegetable origin
Minimum content of nutrients (percentage by weight) and other requirements:
Total: 20 %, (N + P2O5 + K2O)
For each of the nutrients: 3 % N, 4 % P2O5, 4 % K2O
Maximum biuret content: ureic N × 0,026
Total nitrogen
Nitric nitrogen
Ammoniacal nitrogen
Ureic nitrogen
Water-soluble P2O5
P2O5 soluble in neutral ammonium citrate
P2O5 soluble in neutral ammonium citrate and water
Water-soluble K2O
Total nitrogen
If any of the forms of nitrogen (2), (3) and (4) amounts to not less than 1 % by weight, it must be declared
If the biuret content is less than 0,2 %, the words “low in biuret” may be added
The fertilisers must not contain Thomas slag, aluminium calcium phosphate, calcined phosphates, partially solubilised phosphates or rock phosphates
If the water-soluble P2O5 is less than 2 %, only solubility 2 shall be declared
If the water-soluble P2O5 is at least 2 %, solubility 3 and the water-soluble P2O5 content shall be declared
Water-soluble potassium oxide
The words “low in chloride” may be used only where the Cl content does not exceed 2 %
The chloride content may be declared
Forms, solubilities and nutrient content to be declared as specified in columns 4, 5 and 6 — Particle size
Data for identification of the fertilisers — Other requirements
N
P2O5
K2O
N
P2O5
K2O
1
2
3
4
5
6
C.2.4
Type designation:
NPK-fertiliser suspension containing urea formaldehyde
Data on method of production:
Product in liquid form, in which the nutrients are derived from substances both in solution and in suspension in water, without addition of organic nutrients of animal or vegetable origin and containing urea formaldehyde
Minimum content of nutrients (percentage by weight) and other requirements:
Total 20 % (N +P2O5 +K2O)
For each of the nutrients:
5 % N, at least 25 % of the declared content of total nitrogen must derive from nitrogen form (5)
At least 3/5 of the declared nitrogen content (5) must be soluble in hot water
4 % P2O5
4 % K2O
Maximum biuret content: (ureic N + urea formaldehyde N) × 0,026
Total nitrogen
Nitric nitrogen
Ammoniacal nitrogen
Ureic nitrogen
Nitrogen from urea formaldehyde
Water-soluble P2O5
P2O5 soluble in neutral ammonium citrate
P2O5 soluble in neutral ammonium citrate and in water
Water-soluble K2O
Total nitrogen
If any of the forms of nitrogen (2), (3) and (4) amounts to not less than 1 % by weight, it must be declared
Nitrogen from urea formaldehyde
If the biuret content is less than 0,2 %, the words “low in biuret” may be added
The fertilisers must not contain Thomas slag, aluminium calcium phosphate, calcined phosphates, partially solubilised phosphates or rock phosphates
If the water-soluble P2O5 is less than 2 %, only solubility (2) shall be declared
If the water-soluble P2O5 is at least 2 %, solubility (3) and the water-soluble P2O5 content shall be declared
Water-soluble potassium oxide
The words “low in chloride” may be used only where the Cl content does not exceed 2 %
The chloride content may be declared
Forms, solubilities and nutrient content to be declared as specified in columns 4, 5 and 6 — Particle size
Data for identification of the fertilisers — Other requirements
N
P2O5
K2O
N
P2O5
K2O
1
2
3
4
5
6
C.2.5
Type designation:
NP-fertiliser solution
Data on method of production:
Product obtained chemically and by dissolution in water, in a form stable at atmospheric pressure, without addition of organic nutrients of animal or vegetable origin
Minimum content of nutrients (percentage by weight) and other requirements:
Total: 18 %, (N + P2O5)
For each of the nutrients: 3 % N, 5 % P2O5
Maximum biuret content: ureic N × 0,026
Total nitrogen
Nitric nitrogen
Ammoniacal nitrogen
Ureic nitrogen
Water-soluble P2O5
Total nitrogen
If any of the forms of nitrogen (2), (3) and (4) amounts to not less than 1 % by weight, it must be declared
If the biuret content is less than 0,2 %, the words “low in biuret” may be added
Water-soluble P2O5
Forms, solubilities and nutrient content to be declared as specified in columns 4, 5 and 6 — Particle size
Data for identification of the fertilisers — Other requirements
N
P2O5
K2O
N
P2O5
K2O
1
2
3
4
5
6
C.2.6
Type designation:
NP-fertiliser solution containing urea formaldehyde
Data on method of production:
Product obtained chemically and by dissolution in water, in a form stable at atmospheric pressure, without addition of organic nutrients of animal or vegetable origin and containing urea formaldehyde
Minimum content of nutrients (percentage by weight) and other requirements:
Total 18 % (N +P2O5)
For each of the nutrients:
5 % N, at least 25 % of the declared content of total nitrogen must derive from nitrogen form (5)
5 % P2O5
Maximum biuret content: (ureic N + urea formaldehyde N) × 0,026
Total nitrogen
Nitric nitrogen
Ammoniacal nitrogen
Ureic nitrogen
Nitrogen from urea formaldehyde
Water-soluble P2O5
Total nitrogen
If any of the forms of nitrogen (2), (3) and (4) amounts to not less than 1 % by weight, it must be declared
Nitrogen from urea formaldehyde
If the biuret content is less than 0,2 %, the words “low in biuret” may be added
Water-soluble P2O5
Forms, solubilities and nutrient content to be declared as specified in columns 4, 5 and 6 — Particle size
Data for identification of the fertilisers. Other requirements
N
P2O5
K2O
N
P2O5
K2O
1
2
3
4
5
6
C.2.7
Type designation:
NP-fertiliser suspension
Data on method of production:
Product in liquid form, in which the nutrients are derived from substances both in solution and in suspension in the water, without addition of organic nutrients of animal or vegetable origin
Minimum content of nutrients (percentage by weight) and other requirements:
Total: 18 %, (N + P2O5)
For each of the nutrients: 3 % N, 5 % P2O5
Maximum biuret content: ureic N × 0,026
Total nitrogen
Nitric nitrogen
Ammoniacal nitrogen
Ureic nitrogen
Water-soluble P2O5
P2O5 soluble in neutral ammonium citrate
P2O5 soluble in neutral ammonium citrate and water
Total nitrogen
If any of the forms of nitrogen (2), (3) and (4) amounts to not less than 1 % by weight, it must be declared
If the biuret content is less than 0,2 %, the words “low in biuret” may be added
The fertilisers may not contain Thomas slag, aluminium calcium phosphate, calcined phosphates, partially solubilised phosphate or rock phosphates
If the water-soluble P2O5 is less than 2 % only solubility 2 shall be declared
If the water-soluble P2O5 is at least 2 %, solubility 3 will be declared and the water-soluble P2O5 content must be stated
Forms, solubilities and nutrient content to be declared as specified in columns 4, 5 and 6 — Particle size
Data for identification of the fertilisers — Other requirements
N
P2O5
K2O
N
P2O5
K2O
1
2
3
4
5
6
C.2.8
Type designation:
NP-fertiliser suspension containing urea formaldehyde
Data on method of production:
Product in liquid form, in which the nutrients are derived from substances both in solution and in suspension in water, without addition of organic nutrients of animal or vegetable origin and containing urea formaldehyde
Minimum content of nutrients (percentage by weight) and other requirements:
Total 18 % (N +P2O5)
For each of the nutrients:
5 % N, at least 25 % of the declared content of total nitrogen must derive from nitrogen form (5)
At least 3/5 of the declared nitrogen content (5) must be soluble in hot water
5 % P2O5
Maximum biuret content: (ureic N + urea formaldehyde N) × 0,026
Total nitrogen
Nitric nitrogen
Ammoniacal nitrogen
Ureic nitrogen
Nitrogen from urea formaldehyde
Water-soluble P2O5
P2O5 soluble in neutral ammonium citrate
P2O5 soluble in neutral ammonium citrate and in water
Total nitrogen
If any of the forms of nitrogen (2), (3) (4) amounts to not less than 1 % by weight, it must be declared
Nitrogen from urea formaldehyde
If the biuret content is less than 0,2 %, the words “low in biuret” may be added
The fertilisers must not contain Thomas slag, aluminium calcium phosphate, calcined phosphates, partially solubilised phosphates or rock phosphates
If the water-soluble P2O5 is less than 2 %, only solubility (2) shall be declared
If the water-soluble P2O5 is at least 2 %, solubility (3) and the water-soluble P2O5 content shall be declared’
the following entries C.2.9 to C.2.14 are added:
Forms, solubilities and nutrient content to be declared as specified in columns 4, 5 and 6 — Particle size
Data for identification of the fertilisers — Other requirements
N
P2O5
K2O
N
P2O5
K2O
1
2
3
4
5
6
‘C.2.9
Type designation:
NK-fertiliser solution
Data on method of production:
Product obtained chemically and by dissolution in water, in a form stable at atmospheric pressure, without addition of organic nutrients of animal or vegetable origin
Minimum content of nutrients (percentage by weight) and other requirements:
Total: 15 % (N + K2O)
For each of the nutrients: 3 % N, 5 % K2O
Maximum biuret content: ureic N × 0,026
Total nitrogen
Nitric nitrogen
Ammoniacal nitrogen
Ureic nitrogen
Water-soluble K2O
Total nitrogen
If any of the forms of nitrogen (2), (3) and (4) amounts to not less than 1 % by weight, it must be declared
If the biuret content is less than 0,2 %, the words “low in biuret” may be added
Water-soluble potassium oxide
The words “low in chloride” may be used only where the Cl content does not exceed 2 %
The chloride content may be declared
Forms, solubilities and nutrient content to be declared as specified in columns 4, 5 and 6 — Particle size
Data for identification of the fertilisers — Other requirements
N
P2O5
K2O
N
P2O5
K2O
1
2
3
4
5
6
C.2.10
Type designation:
NK-fertiliser solution containing urea formaldehyde
Data on method of production:
Product obtained chemically and by dissolution in water, in a form stable at atmospheric pressure, without addition of organic nutrients of animal or vegetable origin and containing urea formaldehyde
Minimum content of nutrients (percentage by weight) and other requirements:
Total 15 % (N + K2O)
For each of the nutrients:
5 % N, at least 25 % of the declared content of total nitrogen must derive from nitrogen form (5)
5 % K2O
Maximum biuret content: (ureic N + urea formaldehyde N) × 0,026
Total nitrogen
Nitric nitrogen
Ammoniacal nitrogen
Ureic nitrogen
Nitrogen from urea formaldehyde
Water-soluble K2O
Total nitrogen
If any of the forms of nitrogen (2), (3) and (4) amounts to not less than 1 % by weight, it must be declared
Nitrogen from urea formaldehyde
If the biuret content is less than 0,2 %, the words “low in biuret” may be added
Water-soluble potassium oxide
The words “low in chloride” may be used only where the Cl content does not exceed 2 %
The chloride content may be declared
Forms, solubilities and nutrient content to be declared as specified in columns 4, 5 and 6 — Particle size
Data for identification of the fertilisers — Other requirements
N
P2O5
K2O
N
P2O5
K2O
1
2
3
4
5
6
C.2.11
Type designation:
NK-fertiliser suspension
Data on method of production:
Product in liquid form, in which the nutrients are derived from substances both in solution and in suspension in the water, without addition of organic nutrients of animal or vegetable origin
Minimum content of nutrients (percentage by weight) and other requirements:
Total: 18 % (N + K2O)
For each of the nutrients: 3 % N, 5 % K2O
Maximum biuret content: ureic N × 0,026
Total nitrogen
Nitric nitrogen
Ammoniacal nitrogen
Ureic nitrogen
Water-soluble K2O
Total nitrogen
If any of the forms of nitrogen (2), (3) and (4) amounts to not less than 1 % by weight, it must be declared
If the biuret content is less than 0,2 %, the words “low in biuret” may be added
Water-soluble potassium oxide
The words “low in chloride” may be used only where the Cl content does not exceed 2 %
The chloride content may be declared
Forms, solubilities and nutrient content to be declared as specified in columns 4, 5 and 6 — Particle size
Data for identification of the fertilisers — Other requirements
N
P2O5
K2O
N
P2O5
K2O
1
2
3
4
5
6
C.2.12
Type designation:
NK-fertiliser suspension containing urea formaldehyde
Data on method of production:
Product in liquid form, in which the nutrients are derived from substances both in solution and in suspension in water, without addition of organic nutrients of animal or vegetable origin and containing urea formaldehyde
Minimum content of nutrients (percentage by weight) and other requirements:
Total 18 %(N +K2O)
For each of the nutrients:
5 % N, at least 25 % of the declared content of total nitrogen must derive from nitrogen form (5)
At least 3/5 of the declared nitrogen content (5) must be soluble in hot water
5 % K2O
Maximum biuret content: (ureic N + urea formaldehyde N) × 0,026
Total nitrogen
Nitric nitrogen
Ammoniacal nitrogen
Ureic nitrogen
Nitrogen from urea formaldehyde
Water-soluble K2O
Total nitrogen
If any of the forms of nitrogen (2), (3) and (4) amounts to not less than 1 % by weight, it must be declared
Nitrogen from urea formaldehyde
If the biuret content is less than 0,2 %, the words “low in biuret” may be added
Water-soluble potassium oxide
The words “low in chloride” may be used only where the Cl content does not exceed 2 %
The chloride content may be declared
Forms, solubilities and nutrient content to be declared as specified in columns 4, 5 and 6 — Particle size
Data for identification of the fertilisers — Other requirements
N
P2O5
K2O
N
P2O5
K2O
1
2
3
4
5
6
C.2.13
Type designation:
PK-fertiliser solution
Data on method of production:
Product obtained chemically and by dissolution in water, without addition of organic nutrients of animal or vegetable origin
Minimum content of nutrients (percentage by weight) and other requirements:
Total: 18 % (P2O5 + K2O)
For each of the nutrients: 5 % P2O5, 5 % K2O
Water-soluble P2O5
Water-soluble K2O
Water-soluble P2O5
Water-soluble potassium oxide
The words “low in chloride” may be used only where the Cl content does not exceed 2 %
The chloride content may be declared
Forms, solubilities and nutrient content to be declared as specified in columns 4, 5 and 6 — Particle size
Data for identification of the fertilisers — Other requirements
N
P2O5
K2O
N
P2O5
K2O
1
2
3
4
5
6
C.2.14
Type designation:
PK-fertiliser suspension
Data on method of production:
Product in liquid form, in which the nutrients are derived from substances both in solution and in suspension in water, without addition of organic nutrients of animal or vegetable origin
Minimum content of nutrients (percentage by weight) and other requirements:
Total: 18 % (P2O5 + K2O)
For each of the nutrients: 5 % P2O5, 5 % K2O
Water-soluble P2O5
P2O5 soluble in neutral ammonium citrate
P2O5 soluble in neutral ammonium citrate and water
Water-soluble K2O
The fertilisers must not contain Thomas slag, aluminium calcium phosphate, calcined phosphates, partially solubilised phosphates or rock phosphates
If the water-soluble P2O5 is less than 2 % only solubility 2 will be declared
If the water-soluble P2O5 is at least 2 % solubility 3 and the water-soluble P2O5 content shall be declared
Water-soluble potassium oxide
The words “low in chloride” may be used only where the Cl content does not exceed 2 %
The chloride content may be declared’
in Table F.1, the following entry 4 is added:
‘4
3,4-dimethyl-1H-pyrazole phosphate (DMPP)
EC No 424-640-9
Minimum: 0,8
Maximum: 1,6’
in Table F.2, the following entry 3 is added:
‘3
Reaction mixture of N-butyl-thiophosphoric-triamide (NBPT) and N-propyl- thiosphosphoric- triamide (NPPT) (ratio 3:1(1))
EC No 700-457-2
Minimum: 0,02
Maximum: 0,3’