Council Regulation (EU) 2017/1134 of 20 June 2017 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

*ex28183000

30

Aluminium hydroxide oxide in the form of boehmite or pseudoboehmite (CAS RN 1318-23-6)

0 %

—

31.12.2018

ex28257000

20

Molybdic Acid (CAS RN 7782-91-4)

0 %

—

31.12.2021

*ex28421000

40

Aluminosilicate (CAS RN 1318-02-1) with a zeolite structure of Aluminophosphate-eighteen (AEI) for use in the manufacture of catalytic preparations (²)

0 %

—

31.12.2021

*ex29051100

ex29051900

20

35

Methyl methanesulphonate (CAS RN 66-27-3)

0 %

—

31.12.2021

ex29052200

20

3,7-Dimethyloct-6-en-1-ol (CAS RN 106-22-9)

0 %

—

31.12.2021

ex29093090

15

{[(2,2-dimethylbut-3-yn-1-yl)oxy]methyl}benzene (CAS RN 1092536-54-3)

0 %

—

31.12.2021

ex29093090

25

1,2-Diphenoxyethane (CAS RN 104-66-5) in the form of powder or as an aqueous dispersion containing by weight 30 % or more but not more than 60 % of 1,2-diphenoxyethane

0 %

—

31.12.2021

*ex29096000

40

1,4-Di(2-tert-butylperoxyisopropyl)benzene (CAS RN 2781-00-2) or mixture of isomers 1,4-Di(2-tert-butylperoxyisopropyl)benzene and 1,3-di(2-tert-butylperoxyisopropyl)benzene (CAS RN 25155-25-3)

0 %

—

31.12.2017

ex29121900

10

Undecanal (CAS RN 112-44-7)

0 %

—

31.12.2021

ex29151200

10

Aqueous solution containing by weight 60 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1)

0 %

—

31.12.2021

*ex29161400

30

Allyl methacrylate (CAS RN 96-05-9) and its' isomers with a purity by weight of 98 % or more and containing at least:

• 0,01 % or more but not more than 0,02 % of Allyl alcohol (CAS RN 107-18-6),

• 0,01 % or more but not more than 0,1 % of Methacrylic acid (CAS RN 79-41-4), and

• 0,5 % or more but not more than 1 % of 4-Methoxyphenol (CAS RN 150-76-5)

0 %

—

31.12.2020

ex29163990

33

Methyl 4′-(bromomethyl)biphenyl-2-carboxylate (CAS RN 114772-38-2)

0 %

—

31.12.2021

ex29163990

73

(2,4-Dichlorophenyl)acetyl chloride (CAS RN 53056-20-5)

0 %

—

31.12.2021

*ex29202900

ex29209070

50

50

Fosetyl-aluminium (CAS RN 39148-24-8)

0 %

—

31.12.2018

*ex29202900

ex29209070

60

40

Fosetyl-sodium (CAS RN 39148-16-8) in form of an aqueous solution with a content by weight of fosetyl-sodium of 35 % or more but not more than 45 % for use in the manufacture of pesticides (²)

0 %

—

31.12.2021

ex29221900

40

(R)-1-((4-amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol 4-methylbenzenesulphonate (CAS RN 1294504-64-5)

0 %

—

31.12.2021

ex29242970

30

Sodium 4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate (CAS RN 84029-45-8)

0 %

—

31.12.2021

ex29242970

50

N-Benzyloxycarbonyl-L-tert-leucine isopropylamine salt (CAS RN 1621085-33-3)

0 %

—

31.12.2021

ex29269070

30

4,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile (CAS RN 84-58-2)

0 %

—

31.12.2021

*ex29319000

05

Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN

0 %

—

31.12.2020

*ex29321400

ex29400000

10

40

1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D-galactopyranoside (CAS RN 56038-13-2)

0 %

—

31.12.2019

ex29329900

13

(4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy 2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl)methanone (CAS RN 1103738-30-2)

0 %

—

31.12.2021

ex29329900

18

4-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile (CAS RN 943311-78-2)

0 %

—

31.12.2021

ex29331990

45

5-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile (CAS RN 120068-79-3)

0 %

—

31.12.2021

ex29331990

55

5-Methyl-1-(naphthalen-2-yl)-1,2-dihydro-3H-pyrazol-3-one (CAS RN 1192140-15-0)

0 %

—

31.12.2021

ex29332990

75

2,2′-Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (CAS RN 27776-21-2)

0 %

—

31.12.2021

ex29333999

10

2-Aminopyridin-4-ol hydrochloride (CAS RN 1187932-09-7)

0 %

—

31.12.2021

ex29333999

33

5-(3-chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS RN 1415226-39-9)

0 %

—

31.12.2021

ex29333999

41

2-chloro-6-(3-fluoro-5-isobutoxyphenyl)nicotinic acid (CAS RN 1897387-01-7)

0 %

—

31.12.2021

ex29333999

46

Fluopicolide (ISO) (CAS RN 239110-15-7) for use in the manufacture of pesticides (²)

0 %

—

31.12.2021

*ex29335995

ex29339980

88

51

Diquat dibromide (ISO) (CAS RN 85-00-7) in aqueous solution for use in the manufacture of herbicides (²)

0 %

—

31.12.2021

ex29339980

42

(S)-2,2,4-Trimethylpyrrolidine hydrochloride (CAS RN 1897428-40-8)

0 %

—

31.12.2021

ex29339980

44

(2S,3S,4R)-Methyl 3-ethyl-4-hydroxypyrrolidine-2-carboxylate 4-methylbenzenesulphonate (CAS RN 1799733-43-9)

0 %

—

31.12.2021

*ex29339980

53

Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CUS 0133723-1) (⁵)

0 %

—

31.12.2018

*ex29339980

72

1,4,7-Trimethyl-1,4,7-triazacyclononane (CAS RN 96556-05-7)

0 %

—

31.12.2018

ex29349990

46

4-Methoxy-5-(3-morpholin-4-yl-propoxy)-2-nitro-benzonitrile (CAS RN 675126-26-8)

0 %

—

31.12.2021

ex29349990

47

Thidiazuron (ISO) (CAS RN 51707-55-2) for use in the manufacture of pesticides (²)

0 %

—

31.12.2021

ex29349990

49

Cytidine 5′-(disodium phosphate) (CAS RN 6757-06-8)

0 %

—

31.12.2021

ex29349990

53

4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0)

0 %

—

31.12.2021

ex29359090

30

6-Aminopyridine-2-sulfonamide (CAS RN 75903-58-1)

0 %

—

31.12.2021

*ex32041600

30

Preparations based on Colourant Reactive Black 5 (CAS RN 17095-24-8) with a content thereof of 60 % or more but not more than 75 % by weight, and including one or more of the following:

• Colourant Reactive Yellow 201 (CAS RN 27624-67-5),

• 1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or

• 3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1)

0 %

—

31.12.2019

ex32041700

22

Colourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with a colourant C.I. Pigment Red 169 content of 50 % or more by weight

0 %

—

31.12.2021

*ex32041700

24

Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) and preparations based thereon with a Colourant C.I. Pigment Red 57:1 content of 50 % or more by weight

0 %

—

31.12.2018

*ex32159070

30

Disposable cartridge ink, containing by weight:

• 1 % or more, but not more than 10 % of amorphous silicon dioxide or

• 3,8 % or more of dye C.I. Solvent Black 7 in organic solvents

for use in the marking of integrated circuits (²)

0 %

—

31.12.2018

*ex35069110

ex35069190

50

50

Preparation containing by weight:

• 15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers and

• 10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers

dissolved in:

• Methyl ethyl ketone (CAS RN 78-93-3)

• Heptane (CAS RN 142-82-5), and

• Toluene (CAS RN 108-88-3) or light aliphatic solvent naphta (CAS RN 64742-89-8)

0 %

—

31.12.2020

ex38112100

11

Dispersing agent and oxidation inhibitor containing:

• o-amino polyisobutylenephenol (CAS RN 78330-13-9),

• more than 30 % by weight but not more than 50 % by weight of mineral oils,

used in the manufacture of blends of additives for lubricating oils (²)

0 %

—

31.12.2021

*ex38112100

19

Additives containing:

• a polyisobutylene succinimide based mixture, and

• more than 30 % but not more than 50 % by weight of mineral oils,

having a total base number of more than 40, for use in the manufacture of lubricating oils (²)

0 %

—

31.12.2019

ex38112900

75

Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils (²)

0 % (²)

—

31.12.2021

ex38119000

50

Corrosion inhibitor containing:

• polyisobutenyl succinic acid and

• more than 5 % and not more than 20 % by weight of mineral oils

for use in the manufacture of blends of additives for fuels (²)

0 %

—

31.12.2021

*ex38159090

40

Catalyst:

• containing molybdenum oxide and other metal oxides in a silicon dioxide matrix,

• in the form of hollow cylindrical solids of a length of 4 mm or more but not more than 12 mm

for use in the manufacture of acrylic acid (²)

0 %

—

31.12.2018

ex38249992

25

Preparation containing by weight:

• 25 % or more but not more than 50 % of diethyl carbonate (CAS RN 105-58-8)

• 25 % or more but not more than 50 % of ethylene carbonate (CAS RN 96-49-1)

• 10 % or more but not more than 20 % of lithium hexafluorophosphate (CAS RN 21324-40-3)

• 5 % or more but not more than 10 % of ethyl methyl carbonate (CAS RN 623-53-0)

• 1 % or more but not more than 2 % of vinylene carbonate (CAS RN 872-36-6)

• 1 % or more but not more than 2 % of 4-fluoro-1,3-dioxolane-2-one (CAS RN 114435-02-8)

• Not more than 1 % of 1,5,2,4-Dioxadithiane 2,2,4,4-tetraoxide (CAS RN 99591-74-9)

0 %

—

31.12.2021

ex38249992

27

4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0) in an organic solvent

0 %

—

31.12.2021

ex38249992

30

Aqueous solution of caesium formate and potassium formate containing by weight:

• 1 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1),

• 1 % or more but not more than 76 % of potassium formate (CAS RN 590-24-1), and

• whether or not containing not more than 9 % of additives

0 %

—

31.12.2021

*ex38249992

40

Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent

0 %

—

31.12.2020

*ex38249992

69

Preparation containing by weight:

• 80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)

• 7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) and

• not more than 1 % triphenyl phosphate (CAS RN 115-86-6)

0 %

—

31.12.2020

ex38249993

45

Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) containing by weight:

• not more than 20 % of disodium sulphate, and

• not more than 10 % of sodium chloride

0 %

—

31.12.2021

ex38249996

70

Powder containing by weight:

• 28 % or more but not more than 51 % of talc (CAS RN 14807-96-6)

• 30,5 % or more but not more than 48 % of silicon dioxide (quartz) (CAS RN 14808-60-7)

• 17 % or more but not more than 26 % of aluminium oxide (CAS RN 1344-28-1)

0 %

—

31.12.2021

ex38249996

74

Mixture with a non-stoichiometric composition:

• with a crystalline structure,

• with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75 % by weight of which consists of fractions with a grain size of 1-3 mm and at most 25 % consists of fractions with a grain size of 0-1 mm

0 %

—

31.12.2021

ex38249996

80

Mixture consisting of:

• 64 % or more, but not more than 74 % by weight of amorphous silica (CAS RN 7631-86-9)

• 25 % or more, but not more than 35 % by weight of butanone (CAS RN 78-93-3) and

• not more than 1 % by weight of 3-(2,3-epoxypropoxy)propyltrimethoxysilane (CAS RN 2530-83-8)

0 %

—

31.12.2021

*ex39011010

ex39019080

20

50

High flow linear low density polyethylene-1-butene/LLDPE (CAS RN 25087-34-7) in form of powder, with

• a melt flow rate (MFR 190 °C/2,16 kg) of 16 g/10 min or more, but not more than 24 g/10 min and

• a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and

• a vicat softening temperature of min. 94 °C

0 %

—

31.12.2019

ex39069090

53

Polyacrylamide powder having an average particle size of less than 2 microns and a melting point of more than 260 °C, containing by weight:

• 75 % or more but not more than 85 % of polyacrylamide and

• 15 % or more but not more than 25 % of polyethylene glycol

0 %

—

31.12.2021

ex39069090

63

Copolymer of (Dimethoxymethylsilyl)propyl methacrylate, butylacrylate, allyl methacrylate, methyl methacrylate and cyclosiloxanes (CAS RN 143106-82-5)

0 %

—

31.12.2021

ex39100000

45

Dimethyl Siloxane, hydroxy-terminated polymer with a viscosity of 38-45 mPa · s (CAS RN 70131-67-8)

0 %

—

31.12.2021

ex39100000

55

Preparation containing by weight:

• 55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083-19-2),

• 30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and

• 1 % or more but not more than 5 % of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7)

0 %

—

31.12.2021

*ex39139000

30

Protein, chemically or enzymatically modified by carboxylation and/or phthalic acid addition, whether or not hydrolysed, having a weight average molecular weight (Mw) of less than 350 000

0 %

—

31.12.2018

ex39209959

70

Tetrafluoroethylene film, put up in rolls, with:

• a thickness of 50 μm,

• a melting point of 260 °C, and

• a specific gravity of 1,75 (ASTM D792)

for use in the manufacture of semiconductor devices (²)

0 %

—

31.12.2021

*ex39211310

10

Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092

0 %

—

31.12.2018

ex39211900

50

Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with:

• a total thickness of more than 0,05 mm but not more than 0,20 mm,

• a water entry pressure between 5 and 200 kPa according to ISO 811, and

• an air permeability of 0,08 cm³/cm²/s or more according to ISO 5636-5

0 %

—

31.12.2021

*ex39231090

10

Photomask or wafer compacts:

• consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,

• having non porous, abrasion resistant or impact resistant surface properties,

• fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and

• with or without a gasket seal,

of a kind used in the photolithography or other semiconductor production to house photomasks or wafers

0 %

—

31.12.2021

*ex39263000

ex87082910

ex87082990

10

10

10

Plastic cover with cips for the exterior rear-view mirror of motor vehicles

0 %

p/st

31.12.2020

*ex39269097

20

Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene of a kind used for the manufacture of remote controls

0 %

p/st

31.12.2019

ex39269097

ex85129090

77

10

Silicone decoupling ring, with an inner diameter of 15,4 mm (+ 0,0 mm/– 0,1 mm), of a kind used in car parking aid sensor systems

0 %

p/st

31.12.2021

ex40169957

10

Air intake hose for air supply to the combustion part of the engine comprising at least:

• one flexible rubber hose,

• one plastic hose, and

• metal clips,

• whether or not a resonator

for use in the manufacture of goods of Chapter 87 (²)

0 %

p/st

31.12.2021

ex40169957

20

Rubber bumper strip with a silicone coating of a length not more than 1 200 mm and with at least five plastic clips for use in the manufacture of goods of Chapter 87 (²)

0 %

p/st

31.12.2021

*ex59119099

ex84219990

30

92

Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more

0 %

—

31.12.2018

*ex59119099

40

Multi-layered non-woven polyester polishing pads, impregnated with polyurethane

0 %

—

31.12.2019

ex68053000

10

Probe tips cleaning material consisting of a polymer matrix containing abrasive particles mounted on a substrate for use in the manufacture of semiconductors (²)

0 %

—

31.12.2021

ex73181900

30

Connecting rod for the master brake cylinder with screw threads on both ends for use in the manufacture of goods of Chapter 87 (²)

0 %

p/st

31.12.2021

*ex74101100

ex85079080

ex85459090

10

60

30

Roll of laminate foil of graphite and copper, with:

• a width of 610 mm or more but not more than 620 mm, and

• a diameter of 690 mm or more but not more than 710 mm,

for use in the manufacture of lithium-ion electric rechargeable batteries (²)

0 %

—

31.12.2021

*ex76071190

ex76071190

47

57

Aluminium foil in rolls:

• having a purity of 99,99 % by weight,

• of a thickness of 0,021 mm or more but not more than 0,2 mm,

• with a width of 500 mm,

• with a surface oxide layer by 3 to 4 nm thick,

• and with a cubic texture of more than 95 %

0 %

—

31.12.2021

*ex76071990

ex85079080

10

80

Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with:

• a width of 595 mm or more but not more than 605 mm, and

• a diameter of 690 mm or more but not more than 710 mm,

for use in the manufacture of cathodes for lithium-ion electric rechargeable batteries (²)

0 %

—

31.12.2021

*ex76169910

ex87089910

ex87089997

30

60

50

Aluminium engine bracket, with dimensions of:

• height of more than 10 mm but not more than 200 mm

• width of more than 10 mm but not more than 200 mm

• length of more than 10 mm but not more than 200 mm

equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:

• internal porosity not more than 1 mm;

• outer porosity not more than 2 mm;

• Rockwell hardness HRB 10 or more

of a kind used in the production of suspensions systems for engines in motor vehicles

0 %

p/st

31.12.2019

*ex81089030

20

Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 8708 92 or 8714 10 40 (²)

0 %

—

31.12.2017

*ex81089050

10

Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not more than 3,1 mm, of a width of 1 000 mm or more but not more than 1 254 mm, for the manufacture of goods of subheading 8714 10 (²)

0 %

—

31.12.2018

*ex81089050

35

Plates, sheets and strips of an alloy of titanium

0 %

—

31.12.2021

*ex83016000

ex84139100

ex84199085

ex84389000

ex84689000

ex84769090

ex84799070

ex84819000

ex85030099

ex85159080

ex85369095

ex85371098

ex87089120

ex87089199

ex87089910

ex87089997

20

40

30

20

20

20

83

30

70

30

95

70

10

20

50

40

Keypads of silicone or plastic,

• whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood,

• whether or not printed or surface treated,

• whether or not with electrical conducting elements,

• whether or not with keypads foil glued on the keyboard,

• whether or not with protective foil,

• single or multilayer

0 %

p/st

31.12.2020

*ex84099100

ex84099900

30

50

Exhaust manifold with spiral-shaped gas turbine turbocharger component with:

• a heat-resistance of not more than 1 050 °C, and

• a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm

0 %

p/st

31.12.2018

ex84099900

40

Plastic or aluminum cylinder head cover with:

• a camshaft position sensor (CMPS),

• metal brackets for mounting on an engine, and

• two or more gaskets,

for use in the manufacture of engines of motor vehicles (²)

0 %

p/st

31.12.2021

ex84119900

65

Spiral-shaped gas turbine turbocharger component:

• with a heat-resistance of not more than 1 050 °C, and

• with a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm

0 %

p/st

31.12.2021

ex84133020

30

Single-cylinder radial-piston high pressure pump for gasoline direct injection with:

• an operating pressure of 200 bar or more, but not more than 350 bar,

• a flow control, and

• a pressure relief valve,

for use in the manufacture of engines of motor vehicles (²)

0 %

—

31.12.2021

ex84799070

87

Fuel hose for internal combustion piston engines with a fuel temperature sensor, with at least two inlet hoses and three outlet hoses for use in the manufacture of engines of motor vehicles (²)

0 %

p/st

31.12.2021

ex84818059

20

Pressure regulating valve for incorporation into compressors of motor vehicle air condition units (²)

0 %

p/st

31.12.2021

ex84842000

10

Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture of motor vehicle air condition units (²)

0 %

p/st

31.12.2021

ex85011099

56

DC Motor:

• with a speed rotation of not more than 7 000 rpm (without load),

• with a nominal voltage of 12 V (± 4 V),

• with a maximum power of 13,78 W (at 3,09 A),

• with a specified temperature range from – 40 °C to 160 °C,

• with a gear connection,

• with a mechanical attachment interface,

• with 2 electrical connections,

• with a maximum torque of 100 Nm

0 %

—

31.12.2021

ex85011099

58

DC Motor:

• with a speed rotation of not more than 6 500 rpm (without load),

• with a nominal voltage of 12 V (± 4 V),

• with a maximal power below than 20 W,

• with a specified temperature range from – 40 °C to 160 °C,

• with a worm gear drive,

• with a mechanical attachment interface,

• with 2 electrical connections,

• with a maximum torque of 75 Nm

0 %

—

31.12.2021

*ex85011099

65

Electric turbocharger actuator, with:

• a DC motor,

• an integrated gear mechanism,

• a (pulling)force of 200 N or more at a minimum of 140 °C elevated ambient temperature,

• a (pulling) force of 250 N or more in each position of its stroke,

• an effective stroke of 15 mm or more but not more than 25 mm,

• with or without an on-board diagnostics interface

0 %

—

31.12.2020

*ex85043180

50

Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry (²)

0 %

—

31.12.2021

*ex85044090

25

Direct current to direct current converter

• without housing or

• with housing with connection pins, connection studs, screw connectors, unprotected line connections, connection elements which allow the mounting to a printed circuit board by soldering or any other technology, or other wiring connections requiring further processing

0 %

p/st

31.12.2021

ex85045095

70

Solenoid coil with:

• a rated power of more than 10 W but not more than 15 W,

• an insulation resistance of 100 M Ohms or more,

• a DC resistance of not more than 34,8 Ohm (± 10 %) at 20 °C,

• a rated current of not more than 1,22 A,

• a rated voltage of not more than 25 V

0 %

p/st

31.12.2021

*ex85051100

65

Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rectangle, whether or not rounded, with a rectangular or a trapezoidal section having

• a length of not more than 140 mm,

• a width of not more than 90 mm, and

• a thickness of not more than 55 mm,

or in the shape of curved rectangle (tile type) having

• a length of not more than 75 mm,

• a width of not more than 40 mm,

• a thickness of not more than 7 mm, and

• a radius of curvature of more than 86 mm but not more than 241 mm

or in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre

0 %

p/st

31.12.2018

*ex85051100

75

A quarter sleeve intended to become permanent magnet after magnetization,

• consisting of at least neodymium, iron and boron,

• with a width of 9,1 mm or more but not more than 10,5 mm,

• with a length of 20 mm or more but not more than 30,1 mm,

of a kind used on rotors for the manufacture of fuel pumps

0 %

p/st

31.12.2019

*ex85079080

70

Cut plate of nickel-plated copper foil, with:

• a width of 70 mm (± 5 mm),

• a thickness of 0,4 mm (± 0,2 mm),

• a length of not more than 55 mm,

for use in the manufacture of lithium-ion electric rechargeable batteries (²)

0 %

p/st

31.12.2021

ex85184080

93

Audio power amplifier with:

• an output power of 50 W,

• an operating voltage of more than 9 V but not more than 16 V,

• an electrical impedance of not more than 4 Ohm,

• a sensitivity of more than 80 dB

• in a metal housing

for use in the manufacture of motor vehicles (²)

0 %

p/st

31.12.2021

*ex85229080

ex85299092

30

57

Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players (²)

0 %

p/st

31.12.2021

*ex85299065

ex85299092

65

53

Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module

0 %

p/st

31.12.2020

*ex85299092

59

LCD modules with:

• a diagonal measurement of the screen of 14,5 cm or more but not more than 25,5 cm,

• a LED backlight,

• a printed circuit board with EPROM (Erasable Programmable Read-only Memory), microcontroller, timing controller, LIN (Local Interconnect Network)bus or APIX2 (Automative Pixel Link) driver module and other active and passive components,

• 6 to 8 pin plug for power supply and 2 to 4- pin LVDS (Low-voltage differential signalling) or APIX2 interface,

• whether or not in a housing,

for permanent incorporation or permanent mounting into motor vehicles of Chapter 87 (²)

0 %

p/st

31.12.2020

*ex85299092

63

LCD module

• with a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm,

• with or without a touch screen,

• with an LED backlight,

• with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,

• with a plug for power supply and CAN and LVDS interfaces,

• with or without electronic components for dynamic adjustments of colour,

• in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system,

suitable for installation in motor vehicles of Chapter 87 (²)

0 %

p/st

31.12.2020

*ex85299092

67

Colour LCD display panel for LCD monitors of heading 8528:

• with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,

• with or without a touch screen,

• with backlight, micro-controller,

• with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface,

• in a housing with or without a heat sink at the back of the housing,

• without a signal-processing module,

• whether or not with haptic and acoustical feedback,

for use in the manufacture of vehicles of Chapter 87 (²)

0 %

p/st

31.12.2020

*ex85369095

20

Semiconductor chip housing in the form of a plastic frame containing a lead frame equipped with contact pads, for voltages of not more than 1 000 V

0 %

p/st

31.12.2020

*ex85369095

92

Metallic stamped frame with connections

0 %

p/st

31.12.2018

*ex85369095

ex85444993

94

10

Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements

0 %

p/st

31.12.2018

ex85371098

65

Lever for control module under the steering wheel:

• with one or more single or multi-positional electrical switches (push-button, rotary or other),

• whether or not equipped with printed circuit boards and electrical cables,

• for a voltage of 9 V or more but not more than 16 V,

of a kind used in the manufacture of motor vehicles of Chapter 87

0 %

p/st

31.12.2021

ex85371098

75

Control unit for keyless access to vehicle and vehicle starting, with electrical switching apparatus, in a plastic housing, for a voltage of 12 V, whether or not with:

• an antenna,

• a connector,

• a metal holder,

for use in the manufacture of goods of Chapter 87 (²)

0 %

p/st

31.12.2021

*ex85371098

92

Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors

0 %

p/st

31.12.2018

ex85389099

60

Front control panel, in the form of a plastic box, with light guides, rotary switches, pressure switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of Chapter 87

0 %

p/st

31.12.2021

ex85437090

15

Laminated electrochromic film consisting of:

• two outer layers of polyester,

• a middle layer of acrylic polymer and silicone, and

• two electric connection terminals

0 %

—

31.12.2021

*ex85437090

33

High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing

0 %

—

31.12.2021

ex85444290

80

12-wire connecting cable containing two connectors

• of a voltage of 5 V,

• with a length of not more than 300 mm

for use in the manufacture of goods of Chapter 87 (²)

0 %

p/st

31.12.2021

ex87081010

ex87081090

10

10

Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 87 (²)

0 %

p/st

31.12.2021

*ex87083010

ex87083091

ex87083099

20

60

10

Motor powered brake actuation unit

• with a rating of 13,5 V (± 0,5 V) and

• a ball screw mechanism to control brake fluid pressure in the master cylinder

for use in the manufacture of electric motor vehicles (²)

0 %

p/st

31.12.2019

*ex87083010

ex87083091

40

30

Body of disc type brake in BIR (‘Ball in Ramp’) or EPB (‘Electronic Parking Brake’) or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2019

*ex87083010

ex87083091

50

10

Drum type parking brake:

• operating within the service brake disk,

• with a diameter of 170 mm or more but not more than 195 mm

for use in the manufacture of motor vehicles (²)

0 %

p/st

31.12.2021

*ex87083010

ex87083091

60

20

Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87 (²)

0 %

p/st

31.12.2019

*ex87083010

ex87083091

70

40

Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2020

*ex87084020

ex87084050

20

10

Automatic hydrodynamic gearbox

• with a hydraulic torque converter,

• without transfer box and cardan shaft,

• whether or not with front differential,

for use in the manufacture of motor vehicles of Chapter 87 (²)

0 %

p/st

31.12.2020

*ex87085020

ex87085055

10

10

Car axle side-shaft fitted with a constant velocity joint at each end, of a kind used in the manufacture of goods of CN heading 8703

0 %

p/st

31.12.2020

*ex87085020

ex87085099

20

10

Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle

• of a length of 1 m or more but not more than 2 m,

• of a weight of 6 kg or more but not more than 9 kg

0 %

p/st

31.12.2020

*ex87085020

ex87085099

ex87089910

ex87089997

30

20

20

70

Single input, dual output gearcase (transmission) in a cast aluminum housing, with overall dimensions of 273 mm (width) × 131 mm (height) × 187 mm (length), comprising at least:

• two electro-magnetic one direction clutches, working in opposite sides,

• an input shaft with an outer diameter of 24 mm (± 1 mm), ended with 22 teeth spline, and

• a coaxial output bushing with an inner diameter of 22 mm (± 1 mm), ended with 22 teeth spline

for use in the manufacture of all-terrain vehicles or utility task vehicles (²)

0 %

—

31.12.2021

*ex87088020

ex87088035

10

10

Upper strut insulator containing

• a metal holder with three mounting screws, and

• a rubber bump

of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2020

*ex87088020

ex87088091

20

10

Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, of kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2020

*ex87088020

ex87088091

30

20

Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, of kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2020

ex87088099

10

Stabilizer bar for front axle equipped with a ball pivot on both ends for use in the manufacture of goods of Chapter 87 (²)

0 %

p/st

31.12.2021

*ex87089120

ex87089135

20

10

Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2019

*ex87089120

ex87089199

30

30

Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with:

• an insulating area flatness of not more than 0,1 mm,

• a permissible particle quantity of 0,3 mg per tank,

• a distance between pores of 2 mm or more,

• pore sizes of not more than 0,4 mm, and

• not more than 3 pores larger than 0,2 mm

of a kind used in heat exchangers for car cooling systems

0 %

p/st

31.12.2020

*ex87089420

ex87089435

10

20

Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2019

*ex87089510

ex87089599

40

10

Front passenger airbag composed of:

• a metal housing with at least six mounting brackets,

• an embedded safety cushion,

• a cartridge filled with compressed gas

of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2020

ex87089910

ex87089997

30

15

Front radiator holder whether or not with rubber cushioning for use in the manufacture of goods of Chapter 87 (²)

0 %

p/st

31.12.2021

ex87089910

ex87089997

40

25

Support bracket of iron or steel, with mounting holes, whether or not with fixation nuts, for connecting the gearbox to the car body for use in the manufacture of goods of Chapter 87 (²)

0 %

p/st

31.12.2021

*ex87149130

ex87149130

ex87149130

25

35

72

Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (²)

0 %

—

31.12.2018

*ex90138090

20

Electronic semiconductor micro-mirror in a housing suitable for the automatic printing of conductor boards, mainly consisting of a combination of:

• one or more monolithic application-specific integrated circuits (ASIC),

• one or more microelectromechanical mirrors (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material

of a kind used for incorporation into products of Chapters 84 to 90 and 95

0 %

p/st

31.12.2019